Currently Empty: £0.00
6 dB N-Type RF Attenuator 100W DC-3 GHz 50 Ohm Plug to Jack
High power 6 dB fixed coaxial attenuator, 50 Ω, DC–3 GHz, 100 W, with N Plug (Male) to N Jack (Female) connectors (Part No. CAT-100W-Nf-Nm-3G-6dB).
SMA Plug to SMA Jack RF Adapter 50 Ohm – Right Angle
Adapter, SMA Jack to SMA Plug, Right Angle,
Part Number: CH-AJ-AP-RA,
Coaxial Adapter,
SMA Jack (Conventional Female),
SMA Plug (Conventional Male),
Right Angle,
10 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Attenuator, N Plug to N Jack, 50 ohms, 6GHz, 10dB,
Part Number: G0-6G-10dB-N,
Attenuator,
N Plug to N Jack, (Conventional Male to Female),
50ohms,
2 Watt,
up to 6GHz, 10dB,
RFShopUK-Other G0 Attenuators,
N Plug to N Jack RF Cable Assembly 1m 200 Series 50 Ohm
Part Number: N30N80-200-1000 , N type male to N female Coaxial Cable Assembly, 1 metres, Low Loss
N Jack to SMA Plug RF Cable Assembly 700mm 200 Series
Part Number: N80A30-200-700-1 , N jack, SMA plug, 200 Cable, Loss at 2.45 GHz < 1.1 dB, Length = 0.7m
RP-SMA Plug to RP-SMA Jack RF Cable Assembly 3m 200 Series
Part Number: A60A90-200-3000-1 , Connector 1: RP SMA Plug (Female pin)
Connector 2: RP SMA Jack (Male pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 3m
-£2.33
20 dB BNC RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-BM5BF5T1G1W20
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1W, 20dB, FAT-BM5BF5T1G1W20
-£8.51
824-1900 MHz Panel Mount Antenna FME Jack – 3.5 m RG58
Part Number: TC21-FME80-58-3500 – mobile phone panel-mount antenna with 3.5 m RG58 cable and FME jack (conventional female) on the end. Covers 824–960 MHz and 1800–1900 MHz, ideal for boosting 2G/3G/4G signal towards the nearest mast from a loft, wall or vehicle body.
TNC Plug to TNC Jack RF Cable Assembly 10m 400 Series
TNC Plug (Conventional Male) to TNC Jack (Conventional Female), CLF400 (or equiv), 10m, T30T85-400-10000
Cable Type: low loss 400 series 0.22 dB per metre at 2.5GHz
Length: 10m
This cable has conventional TNC connectors not RP TNC!!
SMA Jack RF Connector – PCB End Launch 50 Ohm
Part Number: SMA8431-0000
SMA Connector Jack (Conventional Female), PCB Mount End Launch, SMA8431-0000
SMA Jack RF Connector – Bulkhead Right Angle PCB Mount
Part Number: SMA8410-9000
SMA Connector Jack (Conventional Female), PCB Mount, Bulkhead, Right Angle, SMA8410-0000
N-Type Jack RF Connector for 1/2″ Heliax – Clamp 50 Ohm
JYEBAO N8200B-LDF4 – N Type Jack (Conventional Female) clamp connector for 1/2″ corrugated coax including LDF4-50A / RF 1/2″ BHF. 50Ω impedance, PTFE dielectric, supplied with silicone gasket and O-rings for a secure clamp termination.
- Interface: N Type Jack (female)
- Termination: Clamp (for corrugated 1/2″ coax)
- Compatible cables: LDF4-50A, RF 1/2″ BHF
- Impedance: 50Ω