Currently Empty: £0.00
MCX Plug to MMCX Jack RF Adapter 50 Ohm
Adapter, MCX Plug (Conventional Male) to MMCX Jack, (Conventional Female), CH-MCXP-MMCXJ, RFS-100066
Part Number: CH-MCXP-MMCXJ
**Price is for x1 adapter. The photo shows dual view of two adaptors.
SMA Jack RF Connector – Bulkhead PCB End Launch
Part Number: SMA8403-0000
SMA Connector Jack (Conventional Female), PCB Mount for Bulkhead End Launch, SMA8403-0000
N-Type Jack RF Connector for RG58 50 Ohm – Bulkhead Crimp
Connector, N, Jack, Bulkhead, RG58,
Part Number: CH-NJ-58-BH,
Coaxial Connector,
N Type,
Jack (Conventional Female/Socket),
Bulkhead,
RG58, 195 Series, 200 Series,
Crimp,
Also Compatible with RG223 if CH-F-0223-N ferrule is purchased as an add on.
SMA Plug to SMA Jack RF Cable Assembly 5m 200 Series – Bulkhead
Part Number: A30A85-200-5000
SHV Jack RF Connector – Bulkhead
Part Number: SHV8500-0000
SHV connector Jack, (Conventional Female), Bulkhead, SHV8500-0000
SMA Jack RF Connector for RG58 / LMR195 50 Ohm – Crimp
Connector, SMA, Jack, RG58,
Part Number: CH-AJ-58,
Coaxial Connector,
SMA,
Jack (Conventional Female/ Socket),
RG58, 195 Series,
Crimp,
SMA Jack to N Jack RF Adapter 50 Ohm DC-11 GHz
Part Number: AD-A8N8 – SMA jack (female pin) to N jack (female pin) between-series RF adapter for 50 Ω systems. Straight in-line geometry, DC–11 GHz operation with max VSWR 1.2.
DATASHEET
RFShop-Alternative Connector-CH-AJ-NJ
Nickel Plated ADAPTOR FINDER
SMA Plug to SMA Jack RF Cable Assembly 2m 200 Series – Bulkhead
Part Number: A30A85-200-2000
RP-TNC Jack RF Connector for RG58 – Bulkhead Crimp 50 Ohm
RP-TNC Jack, (Male Pin), Reverse Polarity, Bulkhead, Crimp, Fits RG58, LMR195, LMR200
Part Number: CH-RTJ-58-BH
RP-SMA Plug to RP-SMA Jack RF Cable Assembly 300mm 1.13mm
Cable Assembly, SMA Plug RP to SMA Jack RP, 1.13mm cable, 0.3M,
Part Number: A60A95-1.13-300,
Connector 1: SMA
Reverse Polarity Plug (Female Inner Pin),
Connector 2:SMA
Reverse Polarity Jack (Male Inner Pin),
Cable Type: 1.13mm * (Covered in Protective layer of 18mm Heat Shrink Tubing)
Length: 0.3m,
*The 1.13 Cable in this assembly is designed to fit through small spaces such a window frame, to enable a signal through a closed window. The Construction is a flat ‘tape like’ cable.
Cable Data
Construction:
Inner Conductor Silver Plated Copper 7/0.08
Dielectric FEP 0.68
Shield Silver Plated Copper 0.9
Jacket FEP (Grey) 1.13
Electrical Characteristics:
Impedance : 50Ω ±3Ω
Capacitance : 98pF/m
Velocity of Propagation : 69%
Max. Operating Frequency : 6GHz
Dielectric Strength : 500V AC / Minute
Rating Current : 1.5A
Minimum Bend Radius : 4.5mm
Spark Test : 2500VRMS
Operating Temp. Range : -55°C to +155°C
10-32 Microdot Jack RF Connector for RG316 – Bulkhead Crimp
Coaxial connector 10-32 Microdot jack bulkhead for RG316 cable with crimp termination. This panel mount female connector provides secure signal feedthrough for instrumentation enclosures, accelerometer housings, and sensor junction boxes. Mates with standard 10-32 Microdot plugs. Assembly instructions included.