N-Type RF DC Block DC-5 GHz 50 Ohm 100V Plug to Jack
Part Number: DC-NMNF0/5G100V50
DC Block, N Plug to N Jack, (Conventional Male to Female), 5GHz, 100V-DC, 50ohm, DC-NMNF0/5G100V50
SMA RF DC Block DC-5 GHz 50 Ohm 100V Plug to Jack
Part Number: DC-AMAF0/5G100V50 – SMA plug (male) to SMA jack (female) DC block for 50 Ω systems. Passes RF from 10 MHz to 5 GHz while blocking up to 100 V DC with very low insertion loss.
TNC RF T-Adapter 50 Ohm – Jack to Plug to Jack
Adapter, TNC Jack to TNC Plug to TNC Jack,Â
Part Number: AT-T8T3T8
Adapter, TNC Jack (Conventional Female) to TNC Plug (Conventional Male) to TNC Jack (Conventional Female).
SMA Plug to BNC Jack RF Adapter 50 Ohm DC-8 GHz
Between-series SMA plug to BNC jack adapter. 50 Ω, DC–8 GHz, VSWR ≤ 1.2. Brass bodies (SMA side gold-plated, BNC side tin-zinc-copper), PTFE dielectric, gold-plated contact.
SMC Plug to Jack RF Adapter 50 Ohm – Right Angle
Adapter-SMC Plug (Conventional Male) to SMC Jack (Conventional Female), Right Angle
Part Number: CH-CP-CJ-RA
TNC Quick-Fit Plug to TNC Jack RF Adapter 50 Ohm
Adapter, TNC Quick Fit Plug to TNC Jack,Â
Part Number: AD-TQ3T8,Â
Coaxial Adapter,Â
1: TNC Quick Fit (Snap On, Push On),Â
  Plug (Conventional Male),Â
2: TNC
  Jack (Conventional Female/ Socket),Â
Manufacturer: Jye Bao,Â
U.FL to RP-SMA Jack RF Cable Assembly 400mm RG178
Part Number: A95UFL-RG178-400 , Connector 1: U.FL
Connector 2: Bulkhead RP SMA Jack (Male Pin)
Cable Type: RG178
Length: 400mm
similar to R-134G7210200CA
20 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Attenuator, N Plug to N Jack, 50 ohms, 6GHz, 20dB,Â
Part Number: G0-6G-20dB-N,Â
Attenuator,Â
N Plug to N Jack, (Conventional Male to Female),Â
50ohms,Â
2 Watt,Â
up to 6GHz, 20dB,Â
RFShopUK-Other G0 Attenuators,Â
RP-TNC Jack RF Connector for RG58 – Crimp 50 Ohm
RP-TNC Jack, (Male Pin), Reverse Polarity, Crimp, Fits RG58, LMR195, LMR200
Part Number: CH-RTJ-58
BNC Jack RF Connector for RG316 – Bulkhead Crimp 50 Ohm
Part Number: CH-BJ-316-BH , Coaxial Connector BNC jack, female inner pin, Bulkhead, RG316, RG174, Crimp, RG188 CH-BJ-316
TNC Jack RF Connector for RG213 – Crimp
Connector, TNC, Jack, Crimp, RG213,Â
Part Number: TNC8100-0213,Â
Coaxial Connector,Â
TNC,Â
Jack (Conventional Female/Socket),Â
Crimp,Â
RP-TNC Plug to RP-TNC Jack RF Cable Assembly 2m 200 Series
Part Number: T60T95-200-2000 , Connector 1: RP TNC Plug (Female pin)
Connector 2: RP TNC Jack (Male pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 2m
RP-SMA Jack RF Connector for LMR240 – Bulkhead O-Ring Crimp
Part Number: SMA9105-L240
SMA Jack-Reverse Polarity (Male Pin), Crimp, Bulkhead, O-Ring, LMR240, SMA9105-L240
SMA Jack RF Connector – Field Replaceable 4-Hole Flange
REDUCED PRICE-END OF LINE.
Part Number: SMA8F46C-0036
SMA Jack (Conventional Female), Field Replaceable, 4 Hole Flange with EMI Gasket, SMA8F46C-0036
SMA Jack RF Connector for RG142 – Bulkhead Solder
Part Number: SMA8305-0141
SMA Coaxial Jack (Conventional Female), Solder, Bulkhead, RG142, SMA8305-0141
UHF Jack (SO239) RF Connector for RG58 – Crimp
Connector, UHF Jack (SO239), Crimp, RG58, suits 195/200 series cable
Part Number: CH-UHFJ-58
Connector Type: UHF Jack (Female Pin), SO239
Cable Type: RG58
Fitting: Crimp
SMA Jack to RP-SMA Plug RF Adapter 50 Ohm
Adapter, SMA, Jack to Plug RP,Â
Part Number: CH-AJ-RAP,Â
Coaxial Adapter,Â
SMA,Â
- Jack (Conventional Female),Â
- Reverse Polarity Male (Female Inner Pin),Â
RP-SMA Jack to RP-SMA Jack RF Adapter 50 Ohm
Part Number: CH-RAJ-RAJ
Adapter – SMA Jack-RP to SMA Jack-RP, (Male pin), Reverse Polarity, CH-RAJ-RAJ
BNC Plug to Microdot Jack RF Adapter 50 Ohm
Part Number: CH-BP-MDJ
Adapter, BNC Plug (Conventional Male) to Microdot Jack (Conventional Female), CH-BP-MDJ
BNC Jack RF Connector for RG316 / RG174 50 Ohm – Crimp
Coaxial Connector BNC jack female inner pin, RG316, RG174, Crimp, RG188
CH-BJ-316
RP-SMA Plug to RP-SMA Jack RF Cable Assembly 5m 200 Series
RP SMA Extension Lead 5m (ACC-10314-03 equivalent) A60A95-200-5000
SMA Plug to SMA Jack RF Cable Assembly 1m 200 Series – Bulkhead
Part Number: A30A85-200-1000
2-Way RF Power Splitter 400-4000 MHz N Jack 50 Ohm
Splitter, 2 Way, 400 to 4000 MHz, N Jack connector
Product Code: SP-0440-01
Manufacturer: Chang Hong
RP-TNC Jack to U.FL RF Cable Assembly 300mm RG178
Part Number: T95UFL-178-300
TNC Jack-Reverse Polarity (Male pin), Bulkhead, to UFL, RG178, 300mm, T95UFL-178-300
TNC Jack RF Connector for LMR240 – Bulkhead Crimp
Part Number: TNC8105-L240
TNC Jack (Conventional Female), Crimp, Bulkhead, LMR240, TNC8105-L240
6 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-6dB
Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, 2 Watt, up to 6GHz, 6dB, G0-6G-6dB
40 dB N-Type RF Attenuator 100W DC-4 GHz 50 Ohm Plug to Jack
Part Number: CAT-100W-Nf-Nm-3G-40db
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 100Watt, 40dB, CAT-100W-Nf-Nm-3G-40dB
SMA Plug to NEX10 Jack RF Adapter 50 Ohm – Low PIM
Adapter, SMA Plug to NEX 10 Jack, Low PIM,Â
Part Number: AD-A3NX8,Â
Coaxial Adapter,Â
1: SMA
 Plug (Conventional Male),Â
2: NEX10
  Jack (Conventional Female/ Socket),Â
Low PIM,
11 GHz,
VSWR 1.25,
RFShopUK- Other NEX10 Type Products
NEX10 is a trademark of Huber Suhner, Radiall and Rosenberger,Â
Manufactured by Jye Bao to International Standard IEC 61169-71 2022,
3.5 GHz Cantenna Kit with N Jack – DIY WiFi
Product Code: CanKit-3.5GHz-N Antenna,
Make Your own Antenna (Cantenna Kit),
N SMA Jack (Conventional Female),
3.5GHz,
Make your own Antenna ideal for extending WiFi signal to a Garage or External Home Office.
Uses Jye Bao Connector N864AL-0000Â DATASHEET 4 x 8mm screws and nuts included.
Cantenna Kit for 3.5GHz See BUILD YOUR OWN CANTENNAS
SMA Jack to Jack RF Adapter 50 Ohm – Bulkhead O-Ring
Adapter, SMA Jack to SMA Jack, Bulkhead O-Ring,Â
Part Number: CH-AJ-AJ-BH-O
Coaxial Adapter,
SMA Jack (Conventional Female),Â
SMA Jack, (Conventional Female), Bulkhead, O-Ring,Â
3 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-3dB-N – compact 50 Ω fixed attenuator, 3 dB, rated 2 W to 6 GHz, N plug (male) to N jack (female) for quick in-line level control on broadband RF links.
TNC Jack RF Connector for LMR400 – EZ-Fit Crimp
Part Number: TNC81EZ-L400
TNC Jack (Conventional Female), Crimp, LMR400, TNC81EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable) would be TNC8100-L400 (for a soldered inner connection) or TNC8100-0213 (for a soldered or crimped inner connection)ÂÂ
2-Way RF Power Splitter 5-6 GHz N Jack 50 Ohm
Splitter, N Jack, 5-6 GHz, 2 way
Part Number: SP-58-01
Manufacturer: Chang Hong
3-Way RF Power Splitter 700-2700 MHz N Jack 50 Ohm
Splitter, N Jack, 700 MHz-2.7 GHz, 3 way
Part Number: SP-0727-02
Manufacturer: Chang Hong
3 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-3dB
Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, 2 Watt, up to 6GHz, 3dB, G0-6G-3dB
6 dB N-Type RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-NM5NF5T1G1W6
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, 1GHz, 1Watt, 6dB, FAT-NM5NF5T1G1W6
SMA Jack to MMCX Right Angle Plug RF Cable Assembly 150mm RG316
Part Number: A85MMCX39-316-150
RP-SMA Plug to RP-SMA Bulkhead Jack RF Cable Assembly 3m 200 Series
Part Number: A60A95-200-3000
MMCX Right Angle Plug to TNC Jack RF Cable Assembly 150mm RG178 – Bulkhead
Cable Assembly, MMCX Plug RA to TNC Jack, Bulkhead, RG178, 0.15M, MMCX39T85-178-150
Part Number: MMCX39T85-178-150
Cable Assembly, MMCX Plug (Conventional Male) Right Angle to TNC Jack (Conventional Female) Front Mounting, (Rosenberger 56K507-801N4 alternative ), Bulkhead (Nut & Washer Screw to Rear), RG178, 320mm, Old Part Number = T85MMCX39-178-150
30 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-30dB
Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, 2 Watt, up to 6GHz, 30dB, G0-6G-30dB
FME Jack RF Connector for LMR400 / RG213 50 Ohm – Crimp (L400)
FME Jack (Female pin) suit LMR400 / RG213
30 dB N-Type RF Attenuator 10W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-10W-Nf-Nm-3G-30dB
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 10Watt, 30dB, CAT-10W-Nf-Nm-3G-30dB
SMA Plug to SMA Jack RF Cable Assembly 10m 240 Series – Bulkhead
Part Number: A30A85-240-10000
RP-SMA Plug to QMA Jack RF Adapter 50 Ohm
Adapter, SMA, Plug RP to QMA Jack,Â
Part Number: CH-RAP-QMAJ,Â
- SMA,Â
Plug Reverse Polarity (Female Pin),Â
- QMA (Quick fit, Push Fit, Snap On, SMA),Â
Jack (Conventional Female, Socket),Â
30 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Attenuator, N Plug to N Jack, 50 ohms, 6GHz, 30dB,Â
Part Number: G0-6G-30dB-N,Â
Attenuator,Â
N Plug to N Jack, (Conventional Male to Female),Â
50ohms,Â
2 Watt,Â
up to 6GHz, 30dB,Â
RFShopUK-Other G0 Attenuators,Â
N-Type Jack RF Connector for RG58 – Crimp
Connector, N, Jack, RG58,Â
Part Number: CH-NJ-58,Â
Coaxial Connector,Â
N Type,Â
Jack (Conventional Female/Socket),Â
RG58, 195 Series, 200 Series,Â
Crimp,Â
RFShopUK Other N type Connectors
Mini BNC Jack RF Connector for RG179 – Bulkhead Crimp
Connector, Mini BNC, Jack, RG179, Bulkhead,Â
Part Number: CH-MiniBJ-179-BH,Â
Coaxial Connector,
Mini BNC,
Jack (Conventional Female/Socket),Â
Bulkhead
RG179
Crimp
N Plug to N Jack RF Cable Assembly 1m 200 Series 50 Ohm
Part Number: N30N80-200-1000 , N type male to N female Coaxial Cable Assembly, 1 metres, Low Loss
10 dB BNC RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-BM5BF5T1G1W10
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1W, 10dB, FAT-BM5BF5T1G1W10
6 dB BNC RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-BN5BF5T1G1W6
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1W, 6dB, FAT-BN5BF5T1G1W6
Click for Info Sheet
RP-TNC Plug to RP-TNC Jack RF Cable Assembly 10m 400 Series
Part Number: T60T95-400-10000 , Connector 1: RP TNC Plug (Female pin)
Connector 2: RP TNC Jack (Male pin)
Cable Type: Low Loss 400 Series 0.22dB per mtr at 2.5GHz
Length: 10m
UHF Jack (SO239) RF Connector for RG58 – Bulkhead Crimp
Connector, UHF Jack (SO239), Bulkhead, Crimp, RG58, 195/200 series cable
Part Number: CH-UHJ-58-BH
Connector Type: UHF Jack (Female Pin), Bulkhead, SO239
Cable Type: RG58
Fitting: Crimp
RP-SMA Jack to TNC Plug RF Adapter 50 Ohm
Adapter – RP SMA Jack (Male pin) to TNC Plug (male pin) CH-RAJ-TP
SMA Jack to Jack RF Adapter 50 Ohm – Bulkhead
Part Number: CH-AJ-AJ-BH
Adapter, SMA Jack to SMA Jack (Conventional Female), Bulkhead, CH-AJ-AJ-BH
10 dB 7/16 DIN RF Attenuator 50W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-50W-DINf-DINm-3G-10dB
Attenuator, DIN Plug to DIN Jack, (Conventional Male to Female), High Power, 50ohm, 7_16, 50W, DC, 3GHz, 10dB, CAT-50W-DINf-DINm-3G-10dB
BNC Jack RF Connector – 4-Hole Flange Extended PTFE
BNC, fem pin, 4 hole, flange, 4.2mm teflon ext.
SMC Plug to Jack RF Adapter 50 Ohm – Right Angle 1.2.
Adapter, SMC Plug to SMC Jack, Right Angle,Â
Part Number: AL-MC3MC8,Â
Coaxial Adapter,
Right Angle,Â
- SMC Plug (Conventional Male),Â
- SMC Jack (Conventional Female),
4 GHz,
VSWR 1.2.
N Jack to SHV Plug RF Adapter 50 Ohm
Adapter, N Jack to SHV Plug,Â
Part Number: AD-N8V3,Â
Coaxial Adapter,Â
1: N Type
  Jack (Conventional Female/Socket),Â
2: SHV
 Plug (Conventional Male),Â
Manufacturer: Jye Bao,Â
N Plug to HN Jack RF Adapter 50 Ohm
Adapter, N Plug to HN Jack,Â
Part Number: AD-N3HN8,Â
Coaxial Adapter,Â
1: N Type
  Plug (Conventional Male),Â
2: HN Type
  Jack (Conventional Female/ Socket),Â
40 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Attenuator, SMA Plug to SMA Jack, 50 ohms, 6GHz, 40dB,Â
Part Number: G0-6G-40dB,Â
Attenuator,Â
SMA Plug to SMA Jack, (Conventional Male to Female),Â
50ohms,Â
2 Watt,Â
up to 6GHz, 40dB,Â
RFShopUK-Other G0 Attenuators,Â
6 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
6 dB fixed coaxial attenuator, 50 Ω, DC–6 GHz, 2 W, with N Plug (Male) to N Jack (Female) connectors (Part No. G0-6G-6dB-N).
TNC Jack RF Connector for 240 Series – Crimp
Connector, TNC, Jack, 240 Series,
Part Number: TNC8100-L240,Â
Coaxial Connector,Â
TNC,
Jack (Conventional Female),Â
240 Series cable,Â
Crimp,Â
BNC Jack to N-Type Plug RF Adapter 50 Ohm
Adapter- BNC Jack, (Conventional Female), to N Plug, (Conventional Male)
Part Number: CH-BJ-NP
RP-SMA Jack RF Connector for RG316 – Bulkhead Crimp 50 Ohm
Connector, SMA, Jack RP, RG316, Bulkhead,Â
Part Number: CH-RAJ-316-BH,
Coaxial Connector,
SMA,
Reverse Polarity Jack (Male inner Pin),
Bulkhead,
Cable: RG316, RG188. RG174, CLR100,
Crimp,
N Jack to N Jack RF Cable Assembly 1m 200 Series 50 Ohm
Part Number: N80N80-200-1000 , N female to N female Coaxial Cable Assembly, 1 metres, Low Loss
RP-TNC Plug to RP-TNC Jack RF Cable Assembly 3m 200 Series
Part Number: T60T95-200-3000 , Connector 1: RP TNC Plug (Female pin)
Connector 2: RP TNC Jack (Male pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 3m
20 dB RF Directional Coupler 700-2700 MHz 200W N Jack
Directional coupler N jack 20dB 700MHz to 2700MHz (usable from 600MHz) with 200W power handling. Also known as a 20dB RF tap or signal tap, this wideband coupler is designed for distributed antenna systems (DAS), cell phone signal booster installations, and RF power sampling applications. The exceptionally low 0.2dB insertion loss makes it ideal for in-building wireless systems where minimal signal degradation is critical. Covers all 2G, 3G, 4G, and LTE cellular bands including 700MHz, 800MHz, 900MHz, 1800MHz, 2100MHz, and 2600MHz.
N-Type Jack RF Connector for LMR400 – Solderless Crimp
Part Number: N81EZ-L400
N Jack (Female Pin), Crimp, LMR400, N81EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable is N8100-L400 (for a soldered inner connection) or N8100-0213 (for a soldered or crimped inner connection)ÂÂ
10 dB N-Type RF Attenuator 2W DC-10 GHz 50 Ohm Plug to Jack
Part Number: FAT-NM5NF5T10G2W10
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, DC, 10GHz, 2Watt, 10dB, FAT-NM5NF5T10G2W10
6 dB BNC RF Attenuator 1W DC-1 GHz 75 Ohm Plug to Jack
Part Number: FAT-BM7BF7T1G1W6
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 75ohms, DC, 1GHz, 1Watt, 6dB, FAT-BM7BF7T1G1W6
20 dB BNC RF Attenuator 1W DC-1 GHz 75 Ohm Plug to Jack
Part Number: FAT-BM7BF7T1G1W20
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 75ohms, DC, 1GHz, 1Watt, 20dB, FAT-BM7BF7T1G1W20
6 dB N-Type RF Attenuator 50W DC-4 GHz 50 Ohm Plug to Jack
High power 6 dB fixed coaxial attenuator, 50 Ω, DC–4 GHz, 50 W, with N Plug (Male) to N Jack (Female) connectors (Part No. CAT-50W-Nf-Nm-4G-6dB).
3 dB N-Type RF Attenuator 50W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-50W-Nf-Nm-3G-3dB
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, 50W, DC, 3GHz, 3dB, CAT-50W-Nf-Nm-3G-3dB
BNC RF T-Adapter 50 Ohm – Jack to Plug to Jack
Adapter, BNC Jack to BNC Plug to BNC Jack,Â
Part Number: AT-B8B3B8
Coaxial Adapter,
- BNC Jack (Conventional Female),Â
- BNC Plug (Conventional Male),Â
- BNC Jack (Conventional Female).
N Jack to TNC Plug RF Adapter 50 Ohm
Adapter, N Jack to TNC Plug,Â
Part Number: AD-N8T3,Â
Coaxial Adapter,Â
1: N Type
  Jack (Conventional Female/Socket),Â
2: TNC
  Plug (Conventional Male),Â
Manufacturer: Jye Bao,Â
SMA Plug to SMA Jack RF Cable Assembly 3m 200 Series – Bulkhead
Part Number: A30A85-200-3000
WR42 Waveguide to Coaxial Adapter 18-26.5 GHz – SMA Jack
Waveguide to Coaxial Adaptor, SMA Jack, WR42, 0060WA2COBB01X
18-26.5GHz 50Ω SMA Jack (Female)
WR42(UBR220) Waveguide Adapter
Part Number: 0060WA2COBB01X (WR42)
QMA Jack RF Connector for RG58 / 200 Series – Crimp
Connector, QMA Jack, 200 Series, Crimp
Part Number: CH-QMAJ-200
QMA Jack, (Conventional Female)
Fits RG58, LMR195, (Recommend soldering the inner pin)
RFShopUK-Ready made QMA Assemblies
Contact Us for Quotes on Bespoke Cable Assemblies
UHF Jack (SO239) RF Connector – Crimp
UHF Jack, (Conventional Female), SO239, Crimp,
Part Number: CH-UHFJ-PM-A
20 dB BNC RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-BM5BF5T1G1W20
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1W, 20dB, FAT-BM5BF5T1G1W20
SMA Jack to U.FL RF Cable Assembly 300mm RG178 – O-Ring
Part Number: A85oUFL-178-300
SMA Jack (Conventional Female), Bulkhead (O-RING), to UFL, RG178, 300mm, A85oUFL-178-300
Cable Type: RG178
Length: 300mm
DC-6GHz
TNC Plug to TNC Jack RF Cable Assembly 2m 200 Series
Part Number: T30T85-200-2000 , Connector 1: TNC Plug (Male Pin)
Connector 2: Bulkhead TNC Jack (Female Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 2m
This cable has conventional TNC connectors not RP TNC!!
SMB Jack RF Connector for RG316 – Bulkhead Crimp
Part Number: SMB8105-0316
SMB Jack (Conventional Female), Crimp, Bulkhead, RG316, SMB8100-0316
SMA Jack RF Connector 50 Ohm – 2-Hole Flange Round Contact
Part Number: SMA862N3-00AB
SMA Jack (Conventional Female), 2 Hole Flange, Round Contact, SMA862N3-00AB
SMA Jack RF Connector – Bulkhead Solder Cup 50 Ohm
Part Number: SMA8501-0000
SMA Connector Jack (Conventional Female), Solder Cup Contact, Bulkhead, SMA8501-0000
13 dB RF Directional Coupler 800-2000 MHz N Jack
Coaxial Directional Coupler, 13dB, 700-3000 MHz
Part Number: SCO12V3
RFShopUK– Other Directional Couplers
RFDenda.com– Directional Couplers
Manufacturer: Filtronic, Australia
Directional Coupler Specifications and Plots
Technical Specifications: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (600-3000Mhz Directional Coupler)
Model:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SCOV12V3
Coupling(dB):                                    13 ±1
Frequency(MHz):Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 600-3000
Insertion Loss(Db):Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.5dBÂ (This includes 0.25dB loss due to coupling)
Isolation(dB):                                     ≥20
VSWR:                                              ≤1.25:1
Power Rating(w):Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 80
Impedance (ohm):Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 50
Temperature(deg C):Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -35 ~ +125
Connector:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â N (fem)
Colour:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Aluminium (Alodyned) Â <br>
Size                                                   110 x 27 x27 exc connectors
N-Type Jack RF Connector for RG316 – Bulkhead Crimp
Part Number: N8105P-0316
N Jack (Conventional Female), Crimp, Bulkhead, RG316, N8105P-0316
N Plug to N Jack RF Cable Assembly 500mm 200 Series – Bulkhead
Part Number: N30N85-200-500 , Connector 1: N Plug (Male pin)
Connector 2: N Bulkhead Jack (Female pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 0.5m
3 dB N-Type RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-NM5NF5T1G1W3
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1Watt, 3dB, FAT-NM5NF5T1G1W3