RP-SMA Plug to RP-SMA Jack RF Cable Assembly 3m 200 Series
Part Number: A60A90-200-3000-1 , Connector 1: RP SMA Plug (Female pin)
Connector 2: RP SMA Jack (Male pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 3m
20 dB BNC RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-BM5BF5T1G1W20
Fixed Attenuator, BNC Plug to BNC Jack, (Conventional Male to Female), 50ohms, DC, 1GHz, 1W, 20dB, FAT-BM5BF5T1G1W20
824-1900 MHz Panel Mount Antenna FME Jack – 3.5 m RG58
Part Number: TC21-FME80-58-3500 – mobile phone panel-mount antenna with 3.5 m RG58 cable and FME jack (conventional female) on the end. Covers 824–960 MHz and 1800–1900 MHz, ideal for boosting 2G/3G/4G signal towards the nearest mast from a loft, wall or vehicle body.
TNC Plug to TNC Jack RF Cable Assembly 10m 400 Series
TNC Plug (Conventional Male) to TNC Jack (Conventional Female), CLF400 (or equiv), 10m, T30T85-400-10000
Cable Type: low loss 400 series 0.22 dB per metre at 2.5GHz
Length: 10m
This cable has conventional TNC connectors not RP TNC!!
SMA Jack RF Connector – PCB End Launch 50 Ohm
Part Number: SMA8431-0000
SMA Connector Jack (Conventional Female), PCB Mount End Launch, SMA8431-0000
SMA Jack RF Connector – Bulkhead Right Angle PCB Mount
Part Number: SMA8410-9000
SMA Connector Jack (Conventional Female), PCB Mount, Bulkhead, Right Angle, SMA8410-0000
SMA Plug RF Connector for 240 Series – Crimp
Part Number: SMA3100-L240
SMA Connector Plug, (Conventional Male), L240 Cable, SMA3100-L240
RG316 RF Coaxial Cable 30m Roll 50 Ohm Unterminated
Coaxial Cable, RG316, 30m Roll, Unterminated
PART NUMBER: RG316U-30
RG174 RF Coaxial Cable 30m Roll 50 Ohm Unterminated
Coaxial Cable, RG174, 30m Roll, Unterminated, Black,
PART NUMBER:RG174U-30
SMA Phase Trimmer 50 Ohm – Plug to Jack DC to 18 GHz
Part Number: PTS-A3A8-18-15*F
Phase Trimmer Shifter, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, PTS-A3A8-18-15*F
N-Type Jack RF Connector for 1/2″ Heliax – Clamp 50 Ohm
JYEBAO N8200B-LDF4 – N Type Jack (Conventional Female) clamp connector for 1/2″ corrugated coax including LDF4-50A / RF 1/2″ BHF. 50Ω impedance, PTFE dielectric, supplied with silicone gasket and O-rings for a secure clamp termination.
- Interface: N Type Jack (female)
- Termination: Clamp (for corrugated 1/2″ coax)
- Compatible cables: LDF4-50A, RF 1/2″ BHF
- Impedance: 50Ω
N Plug to N Plug RF Cable Assembly 5m 400 Series
Coaxial Cable Assembly, N Plug to N Plug, 400 Series, 5M, N30N30-400-5000
Part Number: N30N30-400-5000
N Plug (Conventional Male), Low Loss, 0.22dB per mtr at 2.5GHz,
BNC Matching Pad 50 Ohm to 75 Ohm DC-2 GHz Plug to Jack
*END OF LINE*
Part Number: MP-BM50BF75-0/2G
Matching Pad, BNC Plug 50ohms to BNC Jack 75ohms, (Conventional Male to Female), 0 to 2GHz, MP-BM50BF75-0/2G
MHV Jack RF Connector for RG58 – Bulkhead Crimp
Coaxial Connector, MHV Jack, RG58,
Part Number: MHV8105-0058,
Coaxial Connector,
MHV,
Jack (Conventional Female),
Bulkhead,
RG58,
Crimp,
MHV Plug to MHV Jack RF Cable Assembly 5m RG59
Part Number: MHV30MHV80-RG59-5000 , MHV Extension Lead. RG 59 Cable
30 dB N-Type RF Attenuator 2W DC-10 GHz 50 Ohm Plug to Jack
Part Number: FAT-NM5NF5T10G2W30 – 30 dB fixed attenuator with N plug (male) to N jack (female) interfaces for 50 Ω systems. DC–10 GHz operating range, 2 W average power and up to 100 W peak for 25 µs.
30 dB SMA RF Attenuator 2W DC-10 GHz 50 Ohm Plug to Jack
Part Number: FAT-AM5AF5G10G2W30
Fixed Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm,DC, 10GHz, 2Watt, 30dB, FAT-AM5AF5G10G2W30
TNC Plug RF Connector for RG58 – Right Angle Crimp
Connector, TNC, Plug, RG58, Right Angled
Part Number: CH-TP-58-RA
TNC
Plug (Conventional Male)
RG58, 200 Series, 195 Series cable
Right Angled
Crimp
RFShopUK- Other TNC Connectors
RP-TNC Plug to TNC Plug RF Adapter 50 Ohm
Part Number: CH-RTP-TP
Adapter-RP TNC Plug-Reverse Polarity (Female pin) to TNC Plug (Conventional Male), CH-RTP-TP
RP-SMA Jack to N Plug RF Adapter 50 Ohm
Adapter, SMA RP Jack to N Plug,
Part Number: AD-A9N3,
Coaxial Adapter,
1: SMA
RP Jack (Reverse Polarity Female/Socket- Male Pin),
2: N Type
Plug (Conventional Male),
Manufacturer: Jye Bao,
N-Type RF Lightning Protector DC-6 GHz – Jack to Jack Bulkhead
Lightning Protector, N Jack to N Jack Bulkhead, 6 GHz,
Part Number: CH-LP-N80N85-6
- N Type
Jack (Conventional Female),
2. N Type
Jack (Conventional Female)
Bulkhead,
DC-6GHz,
N-Type RF Lightning Protector DC-2.5 GHz – Plug to Jack Bulkhead
Lightning Protector, N Plug to N Jack Bulkhead, 2.5GHz.
Part Number: CH-LP-N30N85-2.5
Lightning Protector (Surge Arrester),
- N Type
Plug (Conventional Male),
2. N Type
Jack (Conventional Female)
Bulkhead,
DC-2.5GHz,
40 dB 7/16 DIN RF Attenuator 50W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-50W-DINf-DINm-3G-40dB
Attenuator, DIN Plug to DIN Jack, (Conventional Male to Female), High Power, 50ohm, 7_16, 50W, DC, 3GHz, 40dB, CAT-50W-DINf-DINm-3G-40dB
30 dB N-Type RF Attenuator 30W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-30W-Nf-Nm-3G-30dB
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 30Watt, 30dB, CAT-30W-Nf-Nm-3G-30dB
6 dB N-Type RF Attenuator 10W DC-3 GHz 50 Ohm Plug to Jack
Part Number: CAT-10W-Nf-Nm-3G-6dB
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 10Watt, 6dB, CAT-10W-Nf-Nm-3G-6dB