Currently Empty: £0.00
Semi-Rigid Cable Bending Tool for 0.086″ / 0.141″
Tools, Semi Rigid Cable Bending Tool, RG402, RG405, 0.141″,0.086″
Part Number: Rg402_405bender
RFshop manufactures a professional hand operated cable benders, specifically designed for RG402 and RG405 semi rigid coaxial cable. They can be used with either copper, stainless steel or aluminium jacketed RG402 or RG405.
The bender is capable of forming complex, fully formed bends without any distortion of the critical internal dimensions of the cable. Bend angles ranging from 0 to 180° are possible.
Ratchet Crimping Tool for Coaxial Connectors
Tools, Ratchet Crimp Tool (96-336K), Part Number HT-336
Crimping Tool Only
Part Number: HT-336
See also this toolkit
Crimp Die for LMR400 / RG213 Connectors
Part Number: HT-336K , Die sizes 0.100″ (2.54mm), 0.128″ (3.25mm) , 0.429″ (10.9mm).Suits most LR400, RG213 connectors
This die fits into this tool.
Crimping Tool with Die for LMR600
Crimping Tool with Die for LMR600,
Part Number: TL-136BR,
Crimp Tool with Ratchet,
Fitted Die for LMR600 included. (15.5mm/0.610″ and 4.72mm/0.186″),
Crimp Die for Crimping Tool – 6-Cavity
Part Number: HT-336J , Die sizes 0.042″ (1.07mm), 0.068″ (1.72mm) , 0.078″ (1.98mm), 0.128″ (3.25mm), 0.151″ (3.84mm) , 0.178″ (4.52mm)
This die fits into this tool.
Crimp Die for RG58 / RG316 / 200 / 240 Series
Part Number: HT-336G , Die sizes 0.043″ (1.09mm), 0.068″ (1.72mm) , 0.100″ (2.54mm), 0.137″ (3.48mm), 0.213″ (5.41mm) , 0.255″ (6.48mm). Suits most RG58,( 195),200, 240 and RG316 (RG174) size connectors.
This die fits into this tool.
RF Coaxial Cable Preparation and Termination Kit
Coaxial Cable Installation Kit,
Part Number: TEL-330K,
Professional coaxial cable preparation and termination Kit:
- HT-336A4 professional ratchet crimping tool (with HT-3A4 die set)
- Extra HT-3C/3G/3J/3K die sets to suit F/BNC/Fiber Optic connectors:
HT-3A4: 0.255″ (6.48mm)/ 0.187″ (4.75mm)/ 0.068″ (1.73mm)/ 0.213″ (5.41mm) suits RG58/59/62/174
HT-3C: 0.256″ (6.5mm)/ 0.319″ (8.1mm)/ 0.068″ (1.73mm)/ 0.213″ (5.41mm) suits RG58/59/62/6
HT-3G: 0.043″ (1.09mm)/ 0.068″ (1.73mm)/ 0.100″ (2.54mm)/ 0.137″ (3.48mm)/ 0.213″ (5.41mm)/ 0.255″ (6.48mm) suits RG58/59/62/174/Fiber Optic
HT-3J: 0.042″ (1.07mm)/ 0.068″ (1.73mm)/ 0.078″ (1.98mm)/ 0.128″ (3.25mm)/ 0.151″ (3.84mm)/ 0.178″ (4.52mm) suits RG174/179/Belden8218/Fiber Optic
HT-3K: 0.100″ (2.54mm)/ 0.128″ (3.25mm)/ 0.429″ (10.90mm) suits RG8/11/174/179/213/LMR400
- HT-332 Coaxial Cable Stripper, 2-blade model for RG58/59/62/6/6QS/3C/4C/5C cables
- HT-206 Cable cutter to suit cable O.D. up to 0.041″ (10.5mm)
- Screwdriver for fitting die
SMA Torque Wrench – Huber Suhner
Part Number: 74_Z-0-0-21 , The Huber Suhner 74Z-0-0-21 is a standard style steel PC / SMA torque wrench. Designed for use on SMA / PC 3.5 series connectors, the sma torque wrench has a torque of 1.00 Newton-meters (8.85 inch-pounds) and opening of 8 mm (.315″).
Torque Wrench,
SMA,
8mm (0.314″),
Fixed, 8.85 in-lbs (1.00Nm),
Huber + Suhner Inc.
SMA Calibration Kit (Open / Short / Load) 50 Ohm
Part Number: SMACAL , Low cost SMA Cal Kits for educational and pre-final test use only. Not meant as an absolute standard, but work well up to at least 6 Ghz. Other types on request.
Crimp Die for Crimping Tool – 6-Cavity Small Gauge
Die for Crimp Tool
Part Number: TL-336T1
Die sizes 0.028″ (0.7112mm), 0.039″(0.9906mm), 0.047″ (1.1938mm), 0.100″ (2.54mm), 0.128″ (3.2512mm), 0.151″ (3.8354mm).
This die fits into this tool.
SMA / 3.5 mm / 1.85 mm Torque Wrench 1 Nm
Part Number: TOW-A8AF8.85IL – preset torque wrench for stainless SMA, 3.5 mm and 1.85 mm connectors, 8 mm (5/16″) AF, factory set to 8.85 in-lb (~1.0 N·m).
N-Type Calibration Kit (Open / Short / Load) 50 Ohm
Part Number: NCAL , Low cost N Cal Kits for educational and pre-final test use only. Not meant as an absolute standard, but work well up to at least 6Ghz.
Other types on request.
Crimp Die for Ratchet Crimping Tool – 4-Cavity
Part Number: HT-336-3A4 , Die sizes 0.255″ (6.5mm), 0.068″ (1.72mm) , 0.213″ (5.41mm), 0.187″ (4.75mm)
This die fits into this tool.
Crimp Die for Crimping Tool – 3-Cavity Large Gauge
Die for Crimp Tool
Part Number: HT-3H1
Die sizes 0.255″ (6.477mm), 0.320″(8.128mm), 0.350″ (8.89mm),
This die fits into this tool.
Ergonomic Crimping Tool – Interchangeable Inserts
Tools, Ergonomic Crimping Tool, Part Number: CRT-2
- This is a high quality professional crimping tool with an ergonomic design.
We recommend using an erognomic design if operators crimp frequently. - The inserts have to be ordered seperately.
- This crimping tool can be used with interchangable inserts
RFShop-CRT Inserts
Ratchet Crimping Tool with Hex Die – Coaxial
Coaxial Crimp Tool, Die Included,
Part Number: HT-311M,
Crimp Tool: Ratchet, 8.7″/25.4mm Hex Series
Crimp Die: 0.448″/11.4mm, 0.346″/8.8mm, 0.275″/7mm, 0.078″/2mm, 0.070″/1.8mm, 0.062″/1.6mm, 0.058″/1.48mm,
Die Included,
Soldering Fixture Insert for 0.047″ Semi-Rigid Cable
Semi Rigid Assembly Tool-Insert, JyeBao,
Part Number: ST-047,
Insert For .047” Semi-Rigid Cable
To Be Used With Soldering Fixture ST-008
Soldering Fixture Insert for 0.034″ Semi-Rigid Cable
Semi Rigid Assembly Tool-Insert, JyeBao,
Part Number: ST-034,
Insert for .034” Semi-Rigid Cable
To Be Used With Soldering Fixture ST-008
Locator Tool for Semi-Rigid Soldering Fixture
Semi Rigid Assembly-Locator Tool, JyeBao,
Part Number: ST-0012,
Locator Tool,
To Be Used With Soldering Fixture ST-008
Soldering Fixture Insert for 0.141″ Semi-Rigid Cable
Semi Rigid Assembly Tool-Insert, JyeBao,
Part Number: ST-010,
Insert For .141” Semi-Rigid Cable
To Be Used With Soldering Fixture ST-008
Soldering Fixture Insert for 0.085″ Semi-Rigid Cable
Semi Rigid Assembly Tool-Insert, JyeBao,
Part Number: ST-009,
Insert For .085” Semi-Rigid Cable
To Be Used With Soldering Fixture ST-008
Soldering Gauge for Semi-Rigid Cable Assembly
Semi Rigid Assembly Tool-Soldering Gauge, JyeBao,
Part Number: ST-005,
Soldering Gauge
0.25MM thick,
Dielectric Insertion Tool for SMA Jack Assembly
Dielectric Insertion Tool, SMA Jack, JyeBao,
Part Number: ST-004,
Dielectric Insertion Tool,
for SMA Jack (Conventional Female),
50 ohm,
Dielectric Insertion Tool for SMA Plug Assembly
Dielectric Insertion Tool, SMA Jack, JyeBao,
Part Number: ST-003,
Dielectric Insertion Tool,
for SMA Plug (Conventional Male),
50 ohm,
Locator Tool for SMA Plug Semi-Rigid Assembly
Locator Tool, SMA Plug, JyeBao,
Part Number: ST-001,
Locator Tool,
for :SMA Plug (Conventional Male),
: Contact and Insulator,
50 ohm,
Semi-Rigid Cable Assembly Tool for N Connectors
Part Number: NT-001 , CLICK FOR DATA SHEET
Crimp Die for F Connectors – 3-Cavity
Part Number: HT-336F , Die sizes 0.350″ (8.9mm), 0.320″ (8.1mm) 0.255 (6.5mm) Suits F connectors.
This die fits into this tool.
Crimp Die for RG6 Connectors – 4-Cavity
Part Number: HT-336C , Die sizes 0.256″ (6.5mm), 0.319″ (8.1mm) for RG6 , 0.068″ (1.72mm), 0.213″ (5.41mm)
This die fits into this tool.
Crimp Die for RG6 Connectors – 5-Cavity
Part Number: HT-336AC , Crimping Die 0.068″ (1.72mm), 0.100″ (2.54mm), 0.213″ (5.4mm), 0.255″ (6.48mm) , 0.324″ (8.2mm) for RG6 connectors
This die fits into this tool.
SMA Hermetic Torque Wrench 1.95 Nm – Huber Suhner
SMA Hermetic, 1.95 Nm, 7.0 mm/.276 in opening
Showing all 33 resultsSorted by popularity