Currently Empty: £0.00
Dust Cap for BNC and TNC Jack Connectors – Plastic
Plastic Cap for BNC and TNC female Connectors
BNC Jack to Microdot Plug RF Adapter 50 Ohm
Part Number: CH-BJ-MDP , Adapter BMC female pin (jack) to Microdot male pin (plug) CH-BJ-MDP
BNC Jack RF Connector – Bulkhead Panel Mount Solder
Coaxial Connector, BNC, Jack, Bulkhead, Panel Mount
Part Number: CH-BJ-01-BH
BNC
Jack (Conventional Female)
Bulkhead
Panel Mount
Solder
BNC Jack RF Connector for RG58 / LMR195 50 Ohm – Crimp
Coaxial Connector BNC jack, female inner pin, RG58, LMR195, Crimp,CH-BJ-58
BNC Plug to Microdot Plug RF Cable Assembly 1.5m RG316
BNC Plug to Microdot Plug, RG316, 1.5M, B30MD30-316-1500
Part Number: B30MD30-316-1500
BNC Plug to Microdot Plug (Conventional Male to Male), RG316, 1.5M, B30MD30-316-1500
Example Datasheet-Microdot Plug Connector
BNC Plug RF Connector for RG179 – Crimp
Connector, BNC Plug, RG179, Crimp,
Part Number: BNC3100-0179,
Coaxial Connector,
BNC
Plug (Conventional Male),
RG179,
Crimp,
BNC Plug to Microdot Plug RF Cable Assembly 600mm RG316
BNC Plug to Microdot Plug, RG316, 0.6M, B30MD30-316-600
Part Number: B30MD30-316-600
BNC Plug to Microdot Plug (Conventional Male to Male), RG316, 0.6M, B30MD30-316-600
Example Datasheet-Microdot Plug Connector
BNC Jack RF Connector for RG58 – Bulkhead Crimp
BNC jack, Cable Mount, female pin,Suit RG58, 195
BNC Feedthrough RF Termination 2W DC-1 GHz 50 Ohm
Feed Through Termination, BNC Plug to Jack, (Conventional Male to Female), 1GHZ, 2W, 50ohm, F-BMBF0/1G2W50
Part Number: F-BMBF0/1G2W50
Feed through terminations are used to match 50ohm or 75 ohm lines to the higher impedance inputs of, oscilloscopes and other electronic instruments.
The can be used either way around. They are essentially just 50ohm or 75 ohm resistors to ground but connected to both ports.
BNC Plug RF Connector for RG6 – Crimp
BNC male, crimp, for RG6
Part Number: Jye Bao: BNC3100-0006 , DATA SHEET
SMA Plug to BNC Jack RF Adapter 50 Ohm DC-8 GHz
Between-series SMA plug to BNC jack adapter. 50 Ω, DC–8 GHz, VSWR ≤ 1.2. Brass bodies (SMA side gold-plated, BNC side tin-zinc-copper), PTFE dielectric, gold-plated contact.