SMA Jack RF Connector – 4-Hole Flange Panel Mount 50 Ohm Extended Dielectric
Connector, SMA, Jack, Panel Mount, 4 hole Flange,
Part Number: CH-AJ-08,
Coaxial Connector,
SMA,
Jack (Conventional Female),
Panel Mount,
4 hole Flange (12.7mm/1/2″),
Teflon (11.5mm/0.45″ -14mm/0.55″)
Flexi-Clamp 460mm – Reusable Cable Clamp (Pack of 10)
Flexi-Clamp (Ring clamp alternative), Reusable, Pack of 10, 460mm,
Part No: HC-L-10-460
Flexi-Clamp 300mm – Reusable Cable Clamp (Pack of 10)
Flexi-Clamp (Ring clamp alternative), Reusable, Pack of 10, 300mm,
Part No: HL-M-10-300
5.1-5.8 GHz Dipole Antenna 3 dBi RP-SMA Plug – Right Angle
Part Number: DA-5158-04-A60-RA – compact right-angle dipole antenna with SMA reverse polarity plug (RP-SMA, female pin) for 50 Ω 5 GHz Wi-Fi equipment. Tuned for 5.1–5.8 GHz with around 3 dBi omnidirectional gain.
2.45 GHz Antenna RP-TNC Plug – Right Angle
Part Number: ANT-T60-2.45GHz-RA – compact right-angle 2.45 GHz antenna with TNC reverse-polarity plug (female pin) for 50 Ω 2.4 GHz ISM / Wi-Fi equipment. Ideal where a small on-device antenna is needed close to the connector.
2.4-2.5 GHz Dipole Antenna 2 dBi SMA Plug
Part Number: DA-24-04-2-A30 – compact straight dipole antenna with SMA plug (conventional male) for 50 Ω equipment. Tuned for the 2.4–2.5 GHz ISM/Wi-Fi band with around 2 dBi omnidirectional gain.
2.4-2.5 GHz Dual-Band Dipole Antenna 2 dBi RP-SMA Plug
Part Number: DA-24-04-2-A60 – compact dual-band 2.4/2.5 GHz dipole antenna with RP-SMA plug (female pin) for 50 Ω equipment. Approx. 2 dBi omnidirectional gain, ideal for Wi-Fi / ISM and 2G/3G/4G devices that use 2.4 GHz for data.
2.4-2.5 GHz Dipole Antenna 2 dBi RP-SMA Plug
Part Number: DA-24-04-2-A60 – compact straight dipole antenna with RP-SMA plug (female pin) for 50 Ω equipment. Tuned for the 2.4–2.5 GHz ISM / Wi-Fi band with around 2 dBi omnidirectional gain.
2.45 GHz Dipole Antenna 3.5 dBi RP-SMA Plug
Part Number: ANT-A60-2-45GHz – straight “rubber-ducky” style dipole with SMA reverse polarity plug (RP-SMA, female pin) for 50 Ω equipment. Tuned for the 2.4–2.5 GHz ISM / Wi-Fi band with around 3.5 dBi omnidirectional gain.
2.45 GHz Dipole Antenna 1.8 dBi N Plug – Straight
Part Number: ANT-NM2.45G1WST – straight dipole antenna with N plug (conventional male) for 50 Ω systems. Tuned for 2.45 GHz with approx. 1.8 dBi vertical omnidirectional gain (per JyeBao datasheet), ideal for 2.4 GHz Wi-Fi / ISM test and enclosure use.
900-930 MHz Dipole Antenna 2 dBi N Plug – Straight
Part Number: GSM-9093-2-N30,
Antenna, Dipole, N Plug (Conventional Male), 900-930 MHz, 2dBi, 2G/3G/4G, GSM-9093-2-N30
Max Power:50W
Length: 200mm
860-960 MHz Dipole Antenna 2 dBi RP-SMA Plug
Part Number: GSM-8696-2-A60 – compact straight “rubber-ducky” dipole with RP-SMA plug (female pin) for 50 Ω gear. Tuned for 860–960 MHz with ~2 dBi omni gain – ideal for GSM/LTE 900 and 900 MHz ISM.
MMCX Jack RF Connector for RG316 – Bulkhead Crimp 50 Ohm
MMCX connector, Bulkhead, Jack, (male pin), RG316, Crimp, CH-MMCXJ-316-BH
Part Number: CH-MMCXJ-316-BH
SMA Jack to SMP Plug RF Adapter 50 Ohm
Part Number: CH-AJ-SMCP
Adapter-SMA Jack (Conventional Female) to SMP Plug (Conventional Male), CH-AJ-SMCP
RP-SMA Plug to N Plug RF Cable Assembly 750mm 200 Series
Cable Assembly, RP SMA Plug to N Plug, 200 series cable, 0.75m A60N30-200-750
Part Number: A60N30-200-750 (Previously N30A60-200-750)
Connector 1: RP SMA Plug (Female Pin)
Connector 2: N Plug (Male Pin)
Cable Type: Low Loss 200 Series 0.45dB per mtr at 2.5GHz (diameter ~5mm)
Length: 0.75m
N Jack to N Jack RF Cable Assembly 2m 200 Series – Bulkhead
Part Number: N85N85-200-2000 , RP-TNC (female pin), 195/CDR200 Cable, Loss at 2.45 GHz <1.3dB, Length = 2000mm N85N85-200-2000 N85N85-200-2000
N Jack to RP-TNC Plug RF Cable Assembly 500mm 200 Series – Bulkhead
Part Number: N85T60-200-500 , RP-TNC (female pin), N female pin(BH), 195/CDR200 Cable, Loss at 2.45 GHz < 0.5dB, Length = 500mm N85T60-200-500 N85T60-200-500
N Jack to RP-TNC Plug RF Cable Assembly 700mm 200 Series – Bulkhead
Part Number: N85T60-200-700 , RP-TNC (female pin), N female pin(BH), 195/CDR200 Cable, Loss at 2.45 GHz < 0.7dB, Length = 700mm
N Jack to RP-TNC Plug RF Cable Assembly 350mm 200 Series – Bulkhead
Part Number: N85T60-200-350 , RP-TNC (female pin), N female pin(BH), 195/CDR200 Cable, Loss at 2.45 GHz < 0.5dB, Length = 350mm
N Jack to RP-TNC Plug RF Cable Assembly 1.5m 200 Series – Bulkhead
Part Number: N85T60-200-1500 , RP-TNC (female pin), N female pin(BH), 195/CDR200 Cable, Loss at 2.45 GHz <1.3dB, Length = 1500mm
N Jack to RP-TNC Plug RF Cable Assembly 700mm 200 Series
Part Number: N80T60-200-700 , N fem pin RP-TNC Plug (fem pin), 200 Cable, Loss at 2.45 GHz < 0.7 dB, Length = 700mm
N Plug to MCX Plug RF Cable Assembly 700mm 200 Series
Part Number: N30MCX30-200-700 , N male pin, MCX male pin , JBY200 Cable,JBY200 Cable, Length = 700mm
N Plug to MCX Plug RF Cable Assembly 300mm 200 Series
Part Number: N30MCX30-200-300 , N male pin, MCX male pin , JBY200 Cable, Length = 300mm
N Plug to MCX Plug RF Cable Assembly 2m 200 Series
Part Number: N30MCX30-200-2000 , N male pin, MCX male pin , JBY200 Cable,JBY200 Cable, Length = 2mtrs
N Plug to MCX Plug RF Cable Assembly 1m 200 Series
Part Number: N30MCX30-200-1000 , N male pin, MCX male pin , 200 Cable, 200 Cable, Length = 1m
SMA Plug to N Plug RF Cable Assembly 10m 200 Series
Part Number: A30N30-200-10000 , Connector 1: N Plug (Male Pin)
Connector 2: SMA Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 10m
N30A30-200-10000