Currently Empty: £0.00
Coaxial Cable, RG142, 30m roll, Unterminated, RG142U-30
Coaxial Cable, RG142, 30m Roll, Unterminated,
PART NUMBER:RG142U-30
Directional Coupler, N Jack, 20dB, 700MHz to 2700MHz, RFS-0727-20
Directional Coupler, N Jack, 20dB, 700MHz to 2700MHz
Part Number: RFS-0727-20
RFShopUK– Other Directional Couplers
RFDenda.com– Directional Couplers
Directional Coupler Specifications and Plots
Technical Specifications: (800-2700Mhz Directional Coupler but work well down to 600 MHz)
Model: RFS-0827-20
Coupling(dB): 20 ±1.1
Frequency(MHz): 800-2700 (600 -2700)
Insertion Loss(Db): 0.2dB (This includes 0.1dB loss due to coupling)
Isolation(dB): ≥20
VSWR: ≤1.25:1
Power Rating(w): 200
Impedance (ohm): 50
Temperature(deg C): -35 ~ +125
Connector: N (fem)
Colour: Grey
Size: 156*63*16.5
POE (Power Over Ethernet), POE Injector, 12-48V, POE1A5
Part Number: POE1A5
POE (Power Over Ethernet), POE Injector, 12-48V, POE1A5
JyeBao Solderless N Jack (Female pin) suit LMR400 (N81EZ-L400) N81EZ-L400
Part Number: N81EZ-L400
N Jack (Female Pin), Crimp, LMR400, N81EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable is N8100-L400 (for a soldered inner connection) or N8100-0213 (for a soldered or crimped inner connection)Â
Cable Assembly, RP SMA Plug to N Plug, 200 series cable, 0.35m A60N30-200-350
Cable Assembly, RP SMA Plug to N Plug, 200 series cable, 0.35m A60N30-200-350
Part Number: A60N30-200-350 (Previously N30A60-200-350)
Connector 1: RP SMA Plug (Female Pin)
Connector 2: N Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 350mm
Connector, HN Plug (Conventional Male), RG58, HN3200-0058
Part Number: HN3200-0058
Connector, HN Plug (Conventional Male), RG58, HN3200-0058
Clamp
Also Fits Cable: RG142, RG400, JBY195
-£39.87
Grid Antenna 5.8 GHz 27 dBi (GA-5800-27)
Engineered for spread-spectrum applications, this antenna uses precision feed-to-reflector geometry to maintain the modelled pattern and impedance. It delivers high gain and long working distance in a lightweight, compact form with good wind resistance.
Feed Through Terminations, BNC, 75ohm, 1Mohm F-BMBF0/1G2W75
Feed through terminations are used to match 50ohm or 75 ohm lines to the higher impedance inputs of, oscilloscopes and other electronic instruments.
The can be used either way around. They are essentially just 50ohm or 75 ohm resistors to ground but connected to both ports.
Part Number: F-BMBF0/1G2W75
Feed Through Termination, BNC Plug to BNC Jack, (Conventional Male to Female), 1GHz, 2W, 75ohm, F-BMBF0/1G2W75
-£6.13
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, DC, 10GHz, 2Watt, 10dB, FAT-NM5NF5T10G2W10
Part Number: FAT-NM5NF5T10G2W10
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, DC, 10GHz, 2Watt, 10dB, FAT-NM5NF5T10G2W10