Currently Empty: £0.00
SMA Plug to SMA Plug RF Adapter 50 Ohm DC-18 GHz
Within-series SMA plug to SMA plug inline adapter (male pin both ends). Straight, compact 50 Ω coupler for lab, RF test, and antenna/cable gender conversions.
Adaptor, Part Number: AD-A3A3 , DATASHEET
Lemo-Compatible Plug RF Connector for RG58 – Solder
Connector, Lemo Equivalent FFY.00.250.CTAC52 , RG58, Solder, Clamp, Rubber Boot, 00STY25OCTA50520
SMA Jack RF Connector for 200 Series – Bulkhead Crimp 50 Ohm
Connector, SMA, Jack, 200 Series, Bulkhead,
Part Number: CH-AJ-200-BH,
Coaxial Connector,
SMA,
Jack (Conventional Female/Socket),
200 Series, 195 Series,
Bulkhead,
Crimp,
TNC Plug to TNC Jack RF Cable Assembly 5m 200 Series
Part Number: T30T85-200-5000 , Connector 1: TNC Plug (Male Pin)
Connector 2: Bulkhead TNC Jack (Female Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 5m
This cable has conventional TNC connectors not RP TNC!!
TNC Plug to TNC Jack RF Cable Assembly 3m 200 Series
Part Number: T30T85-200-3000 , Connector 1: TNC Plug (Male Pin)
Connector 2: Bulkhead TNC Jack (Female Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 3m
This cable has conventional TNC connectors not RP TNC!!
DC-6GHz
Dust Cap for SMA Jack Connectors – Black Plastic
Connector Cover SMA Jack, Black, Plastic, SMA80DP
Part Number: SMA80DP
SMA Jack to Jack RF Rotary Joint 50 Ohm
Part Number: RJS-A8A8
Rotary Joint, SMA Jack to SMA Jack, (Conventional Female), 50ohms, RJS-A8A8
SMA RF DC Block DC-5 GHz 50 Ohm 100V Plug to Jack
Part Number: DC-AMAF0/5G100V50 – SMA plug (male) to SMA jack (female) DC block for 50 Ω systems. Passes RF from 10 MHz to 5 GHz while blocking up to 100 V DC with very low insertion loss.
RP-TNC Plug RF Connector for LMR400 / RG213 – Right Angle Crimp
Part Number: CH-RTP-400-RA
RP-SMA Plug RF Connector for RG58 / LMR195 50 Ohm – Crimp
SMA RP-Plug (female inner pin) Crimp, Fits LMR195, LMR200, RG58. Part Number: CH-RAP-58
FME Plug RF Connector for RG58 / LMR195 50 Ohm – Crimp
Connector, FME Plug, RG58, Crimp
Part Number: CH-FMEP-58
Coaxial Connector
FME
Plug (Conventional Male)
RG58, 195 Series, 200 Series
Crimp
BNC Plug RF Connector for RG6 – Crimp
BNC male, crimp, for RG6
Part Number: Jye Bao: BNC3100-0006 , DATA SHEET
TNC RF T-Adapter 50 Ohm – Jack to Plug to Jack
Adapter, TNC Jack to TNC Plug to TNC Jack,
Part Number: AT-T8T3T8
Adapter, TNC Jack (Conventional Female) to TNC Plug (Conventional Male) to TNC Jack (Conventional Female).
SMA Plug to BNC Jack RF Adapter 50 Ohm DC-8 GHz
Between-series SMA plug to BNC jack adapter. 50 Ω, DC–8 GHz, VSWR ≤ 1.2. Brass bodies (SMA side gold-plated, BNC side tin-zinc-copper), PTFE dielectric, gold-plated contact.
20KV SHV Plug RF Connector for RG213/HRG58 – Crimp
Coaxial Connector, Kings 20KV Plug, SHV20, RG213, Crimp, (Conventional Male), 20KV-3100-0213
Part Number: 20KV-3100-0213
JYEBAO DATASHEET-20KV-3100-0213
RG213 CABLE-RFShopUK
C-Type Plug RF Connector for RG58 – Clamp 50 Ohm
Connector, C Type, Plug, RG58,
Part Number: C3200B-0058,
Coaxial Connector,
C Type,
Plug (Conventional Male),
RG58,
N Plug to U.FL RF Cable Assembly 300mm RG178
Part Number: N30UFL-178-300 , UFL, N male Plug, RG178 Cable, Length = 300mm
RF Coaxial Cable Preparation and Termination Kit
Coaxial Cable Installation Kit,
Part Number: TEL-330K,
Professional coaxial cable preparation and termination Kit:
- HT-336A4 professional ratchet crimping tool (with HT-3A4 die set)
- Extra HT-3C/3G/3J/3K die sets to suit F/BNC/Fiber Optic connectors:
HT-3A4: 0.255″ (6.48mm)/ 0.187″ (4.75mm)/ 0.068″ (1.73mm)/ 0.213″ (5.41mm) suits RG58/59/62/174
HT-3C: 0.256″ (6.5mm)/ 0.319″ (8.1mm)/ 0.068″ (1.73mm)/ 0.213″ (5.41mm) suits RG58/59/62/6
HT-3G: 0.043″ (1.09mm)/ 0.068″ (1.73mm)/ 0.100″ (2.54mm)/ 0.137″ (3.48mm)/ 0.213″ (5.41mm)/ 0.255″ (6.48mm) suits RG58/59/62/174/Fiber Optic
HT-3J: 0.042″ (1.07mm)/ 0.068″ (1.73mm)/ 0.078″ (1.98mm)/ 0.128″ (3.25mm)/ 0.151″ (3.84mm)/ 0.178″ (4.52mm) suits RG174/179/Belden8218/Fiber Optic
HT-3K: 0.100″ (2.54mm)/ 0.128″ (3.25mm)/ 0.429″ (10.90mm) suits RG8/11/174/179/213/LMR400
- HT-332 Coaxial Cable Stripper, 2-blade model for RG58/59/62/6/6QS/3C/4C/5C cables
- HT-206 Cable cutter to suit cable O.D. up to 0.041″ (10.5mm)
- Screwdriver for fitting die
SMA Plug RF Connector – 4-Hole Flange
Part Number: SMA364A-0000
SMA Connector Plug (Conventional Male), 4 Hole Flange, SMA364A-0000
N-Type Plug RF Connector for LMR400 – Solderless Crimp
Part Number: N31EZ-L400
N Plug (Male Pin), Crimp, LMR400, N31EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable is N3100-L400 (for a soldered inner connection) or N3100-0213 (for a soldered or crimped inner connection)Â
N-Type RF DC Block DC-5 GHz 50 Ohm 100V Plug to Jack
Part Number: DC-NMNF0/5G100V50
DC Block, N Plug to N Jack, (Conventional Male to Female), 5GHz, 100V-DC, 50ohm, DC-NMNF0/5G100V50
SMC Plug to Jack RF Adapter 50 Ohm – Right Angle
Adapter-SMC Plug (Conventional Male) to SMC Jack (Conventional Female), Right Angle
Part Number: CH-CP-CJ-RA
TNC Quick-Fit Plug to TNC Jack RF Adapter 50 Ohm
Adapter, TNC Quick Fit Plug to TNC Jack,
Part Number: AD-TQ3T8,
Coaxial Adapter,
1: TNC Quick Fit (Snap On, Push On),
Plug (Conventional Male),
2: TNC
Jack (Conventional Female/ Socket),
Manufacturer: Jye Bao,
0.085″ Semi-Rigid RF Coaxial Cable 6.5m 50 Ohm (RG405 Type)
0.085″ (RG405) semi-rigid coaxial cable supplied as a 6.5-metre unterminated roll. Features 50Ω impedance, solid PTFE dielectric, and a bare copper outer conductor for excellent RF shielding. Suitable for microwave applications to 20 GHz. Compatible with SMA solder connectors for 0.085″/RG405 cable.
RG174 RF Coaxial Cable – Per Metre 50 Ohm Unterminated
Coaxial Cable, RG174, Per Metre, Unterminated, Black
PART NUMBER:RG174U-PM
RG174 COMPATIBLE PRODUCTS-RFShopUK
RG316 RF Coaxial Cable – Per Metre 50 Ohm Unterminated
Coaxial Cable, RG316, Per Metre, Unterminated
PART NUMBER: RG316U-PM
SMA Plug RF Connector for 0.141″ Semi-Rigid – Right Angle Solder
Connector, SMA Plug, 0.141″ Semi Rigid, RG402, Right Angle, Solder
Part Number: CH-AP-141-RA
SMA
Plug (Conventional Male)
0.141″, RG402
Right Angle
Solder Pin
RG142 RF Coaxial Cable – Per Metre 50 Ohm Unterminated
Coaxial Cable, RG142, Per metre, Unterminated
PART NUMBER: RG142U-PM
RFShopUK-RG142 COMPATIBLE PRODUCTS
(RG58 Connectors are Compatible with RG142 Cable)
Cable Assemblies made to order.
JBY195 RF Coaxial Cable – Per Metre 50 Ohm Unterminated
Coaxial Cable, JBY195, Per Metre, Unterminated, Black.
PART NUMBER:JBY195U-PM
JBY195 COMPATIBLE PRODUCTS-RFShopUK
20 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Attenuator, N Plug to N Jack, 50 ohms, 6GHz, 20dB,
Part Number: G0-6G-20dB-N,
Attenuator,
N Plug to N Jack, (Conventional Male to Female),
50ohms,
2 Watt,
up to 6GHz, 20dB,
RFShopUK-Other G0 Attenuators,
RP-TNC Jack RF Connector for RG58 – Crimp 50 Ohm
RP-TNC Jack, (Male Pin), Reverse Polarity, Crimp, Fits RG58, LMR195, LMR200
Part Number: CH-RTJ-58
BNC Jack RF Connector for RG316 – Bulkhead Crimp 50 Ohm
Part Number: CH-BJ-316-BH , Coaxial Connector BNC jack, female inner pin, Bulkhead, RG316, RG174, Crimp, RG188 CH-BJ-316
SMA Plug RF Connector for RG316 – Right Angle Crimp 50 Ohm
Connector, SMA Plug, RG316, Right Angle,
Part Number: CH-AP-316-RA,
Coaxial Connector,
SMA Plug (Conventional Male),
Right Angled,
RG316, Rg188, RG174, 100 Series (CLR100),
RP-TNC Plug RF Connector for RG174 / RG316 – Crimp 50 Ohm
Part Number: CH-RTP-174
RP-TNC Plugs, fem pin,Cmp, Fits RG174, RG316
SMA Plug to SMA Plug RF Cable Assembly 350mm 200 Series
Cable Assembly, SMA Plug to SMA Plug, 200 series, 35cm
Product Code:A30A30-200-350
SMA Plug (Conventional Male)
195/low loss 200 series 0.6 dB per metre at 2.5GHz
TNC Jack RF Connector for RG213 – Crimp
Connector, TNC, Jack, Crimp, RG213,
Part Number: TNC8100-0213,
Coaxial Connector,
TNC,
Jack (Conventional Female/Socket),
Crimp,
-£1.00
TNC Plug RF Connector for RG316 – Crimp
REDUCED PRICE-END OF LINE.
Part Number: TNC3100-0316
TNC Plug (Conventional Male), Crimp, RG316, TNC3100-0316
RP-TNC Plug to RP-TNC Jack RF Cable Assembly 2m 200 Series
Part Number: T60T95-200-2000 , Connector 1: RP TNC Plug (Female pin)
Connector 2: RP TNC Jack (Male pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 2m
SSMA Plug RF Connector for RG405 – Solder
Part Number: SSMA3300-0085
SSMA Plug (Conventional Male), Solder, RG405, SSMA3300-0085
Fits 0.085″ semi rigid and semi flex cables.
Caution! Not the same as standard SMA
Can be fitted to cable on request
RP-SMA Jack RF Connector for LMR240 – Bulkhead O-Ring Crimp
Part Number: SMA9105-L240
SMA Jack-Reverse Polarity (Male Pin), Crimp, Bulkhead, O-Ring, LMR240, SMA9105-L240
-£3.04
SMA Jack RF Connector – Field Replaceable 4-Hole Flange
REDUCED PRICE-END OF LINE.
Part Number: SMA8F46C-0036
SMA Jack (Conventional Female), Field Replaceable, 4 Hole Flange with EMI Gasket, SMA8F46C-0036
SMA Jack RF Connector for RG142 – Bulkhead Solder
Part Number: SMA8305-0141
SMA Coaxial Jack (Conventional Female), Solder, Bulkhead, RG142, SMA8305-0141
SMA Plug RF Load Termination 2W DC-6 GHz 50 Ohm
50ohm load, male, 2W, 6GHz
Part Number: SMA3900-0006 , DATASHEET
SMA Termination, Plug (Conventional Male), 50ohm load, 2W, 6GHz, SMA3900-0006
RP-SMA Plug RF Connector for 0.141″ Semi-Rigid – Solder
Part Number: SMA33NV-0141
SMA Connector Plug (Male-NO Pin), Solder, RG402, 0141, semi rigid, SMA33NV-0141
Dust Cap for SMA Plug Connectors – Red Plastic
Part Number: SMA30DP-RED ,
N Plug to RP-TNC Plug RF Cable Assembly 3m 200 Series
Part Number: N30T60-200-3000 , Connector 1: N Plug (Male pin)
Connector 2: RP TNC Plug (Female pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz
Length: 3m
Loss: ~2.1dB @ 2.45 GHz
MHV Plug RF Connector for RG59 – Crimp
Coaxial Connector, MHV Plug, RG59,
Part Number: MHV3100-0059,
Coaxial Connector,
MHV,
Plug (Conventional Male),
RG59,
Crimp,
MCX PCB Edge Mount Terminal for RG316 / RG174 – Crimp
JyeBao MCX0400A-0316 gold-plated brass PCB edge mount terminal. Crimp ferrule attachment for RG174, RG188, RG316, and RG316-E coaxial cables. Compact 12.5 mm body designed for cable-to-board transitions where panel connectors aren’t required. RoHS compliant.
UHF Jack (SO239) RF Connector for RG58 – Crimp
Connector, UHF Jack (SO239), Crimp, RG58, suits 195/200 series cable
Part Number: CH-UHFJ-58
Connector Type: UHF Jack (Female Pin), SO239
Cable Type: RG58
Fitting: Crimp
SMA Jack to RP-SMA Plug RF Adapter 50 Ohm
Adapter, SMA, Jack to Plug RP,
Part Number: CH-AJ-RAP,
Coaxial Adapter,
SMA,
- Jack (Conventional Female),
- Reverse Polarity Male (Female Inner Pin),
RP-SMA Jack to RP-SMA Jack RF Adapter 50 Ohm
Part Number: CH-RAJ-RAJ
Adapter – SMA Jack-RP to SMA Jack-RP, (Male pin), Reverse Polarity, CH-RAJ-RAJ
BNC Plug to Microdot Jack RF Adapter 50 Ohm
Part Number: CH-BP-MDJ
Adapter, BNC Plug (Conventional Male) to Microdot Jack (Conventional Female), CH-BP-MDJ
BNC Plug RF Connector for RG58 50 Ohm – Right Angle Crimp
Coaxial Connector BNC plug, Right Angle male inner pin, RG58, LMR195, LMR200 Crimp, RG188 CH-BP-58-RA
BNC Jack RF Connector for RG316 / RG174 50 Ohm – Crimp
Coaxial Connector BNC jack female inner pin, RG316, RG174, Crimp, RG188
CH-BJ-316
SMA Plug to Plug RF Adapter 50 Ohm
Part Number: CH-AP-AP
Adapter – SMA Plug to SMA Plug, (Conventional Males), CH-AP-AP
-£1.38
890-960 MHz Dipole Antenna 2.15 dBi RP-SMA Plug
Part Number: ANT900Q2P-A60 – compact “rubber ducky” dipole antenna with SMA reverse polarity plug (female pin) for 50 Ω equipment. Tuned for 890–960 MHz with around 2.15 dBi gain, ideal for 2G/3G/4G use on the 900 MHz band.
RP-SMA Plug to RP-SMA Jack RF Cable Assembly 5m 200 Series
RP SMA Extension Lead 5m (ACC-10314-03 equivalent) A60A95-200-5000
SMA Plug to RP-TNC Plug RF Cable Assembly 2m 200 Series
Coaxial Cable Assembly, SMA Plug to TNC RP Plug, 200 Series, 2M, A30T60-200-2000
SMA Plug (Conventional Male) to TNC RP Plug (Female Pin), 200 series Cable, 2M
Part Number: A30T60-200-2000
SMA Plug Connector- Example Datasheet
TNC Plug Connector- Example Datasheet
Cables available in any length. Please email: sales@rfshop.co.uk for prices and delivery times.
SMA Plug to SMA Jack RF Cable Assembly 1m 200 Series – Bulkhead
Part Number: A30A85-200-1000
SMA Plug to SMA Plug RF Cable Assembly 200mm RG316
SMA male Plug, SMA male Plug, RG316 Cable, Length = 200mm
2-Way RF Power Splitter 400-4000 MHz N Jack 50 Ohm
Splitter, 2 Way, 400 to 4000 MHz, N Jack connector
Product Code: SP-0440-01
Manufacturer: Chang Hong
Microdot Plug to Microdot Plug RF Cable Assembly 1.5m RG316
Cable Assembly, Microdot, Plug to Plug, RG316, 1.5M
Part Number: MD30MD30-316-1530
Microdot Equivalent
Plug (Conventional Male)
Plug (Conventional Male)
RG316
1530mm (1.5M / 5 Ft)
SMA Plug to N Plug RF Cable Assembly 700mm 200 Series
Coaxial Cable Assembly, SMA Plug to N Plug, 200 Series Cable, 0.7M, A30N30-200-700
Part Number: A30N30-200-700
SMA Plug (Conventional Male) to N Plug (Conventional Male), LMR200
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
RP-TNC Jack to U.FL RF Cable Assembly 300mm RG178
Part Number: T95UFL-178-300
TNC Jack-Reverse Polarity (Male pin), Bulkhead, to UFL, RG178, 300mm, T95UFL-178-300
TNC Jack RF Connector for LMR240 – Bulkhead Crimp
Part Number: TNC8105-L240
TNC Jack (Conventional Female), Crimp, Bulkhead, LMR240, TNC8105-L240
40 dB N-Type RF Attenuator 100W DC-4 GHz 50 Ohm Plug to Jack
Part Number: CAT-100W-Nf-Nm-3G-40db
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 100Watt, 40dB, CAT-100W-Nf-Nm-3G-40dB
N-Type Plug RF Connector 75 Ohm for RG59 – Crimp
Coaxial Connector, N, Plug, RG59, Crimp,
Part Number: CH-NP-59,
Coaxial Connector,
N Type,
Plug (Conventional Male),
RG59,
Crimp Pin and Ferrule,
SMA Plug to NEX10 Jack RF Adapter 50 Ohm – Low PIM
Adapter, SMA Plug to NEX 10 Jack, Low PIM,
Part Number: AD-A3NX8,
Coaxial Adapter,
1: SMA
Plug (Conventional Male),
2: NEX10
Jack (Conventional Female/ Socket),
Low PIM,
11 GHz,
VSWR 1.25,
RFShopUK- Other NEX10 Type Products
NEX10 is a trademark of Huber Suhner, Radiall and Rosenberger,
Manufactured by Jye Bao to International Standard IEC 61169-71 2022,
Gold Plated Ferrule for RG223 Cable
Ferrule, Gold Plated, for RG223 cable,
*Can be used to convert any RG58 Cable Connector to fit a RG223 (simply replace the RG58 Ferrule).
PART NUMBER: CH-F-0223-G
3.5 GHz Cantenna Kit with N Jack – DIY WiFi
Product Code: CanKit-3.5GHz-N Antenna,
Make Your own Antenna (Cantenna Kit),
N SMA Jack (Conventional Female),
3.5GHz,
Make your own Antenna ideal for extending WiFi signal to a Garage or External Home Office.
Uses Jye Bao Connector N864AL-0000 DATASHEET 4 x 8mm screws and nuts included.
Cantenna Kit for 3.5GHz See BUILD YOUR OWN CANTENNAS
N Plug to N Plug RF Cable Assembly 500mm 400 Series
Coaxial Cable Assembly, N Plug to N Plug, 400 Series, 5M, N30N30-400-500
Part Number: N30N30-400-500
N Plug (Conventional Male), Low Loss, 0.22dB per mtr at 2.5GHz,
SMA Jack to Jack RF Adapter 50 Ohm – Bulkhead O-Ring
Adapter, SMA Jack to SMA Jack, Bulkhead O-Ring,
Part Number: CH-AJ-AJ-BH-O
Coaxial Adapter,
SMA Jack (Conventional Female),
SMA Jack, (Conventional Female), Bulkhead, O-Ring,
3 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-3dB-N – compact 50 Ω fixed attenuator, 3 dB, rated 2 W to 6 GHz, N plug (male) to N jack (female) for quick in-line level control on broadband RF links.
QN Plug RF Connector for 400 Series – Crimp
Coaxial Connector, QN, Plug, LMR400,
Part Number: CH-QNP-400,
QN, N Type Quick Fit, (Push fit, Blind-Mate),
Plug (Conventional Male),
400 Series (LMR400),
Crimp,
RP-TNC Plug RF Connector for RG316 – Right Angle Crimp
Connector, TNC Plug, Reverse Polarity, RG316, Crimp, RA
Part Number: CH-RTP-316-RA
Coaxial Connector
TNC
Plug Reverse Polarity (Female Pin)
RG316
Crimp
Right Angled
-£2.30
2.4/5 GHz Dual-Band Dipole Antenna 5 dBi RP-SMA Plug
Part Number: DA-DB-05-A60 – dual-band 2.4 / 5 GHz “rubber ducky” dipole antenna with SMA reverse polarity plug (RP-SMA, female pin) for 50 Ω Wi-Fi / ISM equipment. Around 5 dBi peak gain with omnidirectional coverage in both bands.
N Plug to N Plug RF Cable Assembly 2m 400 Series 50 Ohm
Coaxial Cable Assembly, N Plug to N Plug, 400 Series, 2M, N30N30-400-2000
Part Number: N30N30-400-2000
N Plug (Conventional Male), Low Loss, 0.22dB per mtr at 2.5GHz,
N Plug to TNC Plug RF Cable Assembly 500mm 200 Series
Part Number: N30T30-200-500 , Connector 1: N Plug (Male Pin)
Connector 2: TNC Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 0.5m
TNC Jack RF Connector for LMR400 – EZ-Fit Crimp
Part Number: TNC81EZ-L400
TNC Jack (Conventional Female), Crimp, LMR400, TNC81EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable) would be TNC8100-L400 (for a soldered inner connection) or TNC8100-0213 (for a soldered or crimped inner connection)Â
TNC Plug RF Connector for LMR400 – EZ-Fit Crimp
Part Number: TNC31EZ-L400
TNC Plug (Conventional Male), Crimp, LMR400, TNC31EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400 and equivalent cables.. A better choice for a multistrand 400 cable is TNC3100-L400 (for a soldered inner connection) or TNC 3100-0213 (for a soldered or crimped inner connection)
Â
2-Way RF Power Splitter 5-6 GHz N Jack 50 Ohm
Splitter, N Jack, 5-6 GHz, 2 way
Part Number: SP-58-01
Manufacturer: Chang Hong
3-Way RF Power Splitter 700-2700 MHz N Jack 50 Ohm
Splitter, N Jack, 700 MHz-2.7 GHz, 3 way
Part Number: SP-0727-02
Manufacturer: Chang Hong
N-Type Plug RF Connector 50 Ohm for 200 Series – Crimp
Connector, N Plug, 200 Series
Part Number: N3100A-L200
N Plug (Conventional Male)
Crimp
N Plug to TNC Plug RF Cable Assembly 2m 200 Series
Part Number: N30T30-200-2000 , Connector 1: N Plug (Male Pin)
Connector 2: TNC Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 2m
RP-SMA Plug to N Plug RF Cable Assembly 700mm 200 Series
Cable Assembly, RP SMA Plug to N Plug, 200 Series Cable, 0.70m A60N30-200-700
Part Number: A60N30-200-700
Connector 1: RP SMA Plug (Female Pin)
Connector 2: N Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 700mm
Loss: ~0.7dB @ 2.4GHz
6 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-6dB
Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, 2 Watt, up to 6GHz, 6dB, G0-6G-6dB
3 dB SMA RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-3dB
Attenuator, SMA Plug to SMA Jack, (Conventional Male to Female), 50ohm, 2 Watt, up to 6GHz, 3dB, G0-6G-3dB
-£2.67
6 dB N-Type RF Attenuator 1W DC-1 GHz 50 Ohm Plug to Jack
Part Number: FAT-NM5NF5T1G1W6
Fixed Attenuator, N Plug to N Jack, (Conventional Male to Female), 50ohms, 1GHz, 1Watt, 6dB, FAT-NM5NF5T1G1W6
SMA Jack to MMCX Right Angle Plug RF Cable Assembly 150mm RG316
Part Number: A85MMCX39-316-150
RP-SMA Plug to RP-SMA Bulkhead Jack RF Cable Assembly 3m 200 Series
Part Number: A60A95-200-3000
SMA Plug to SMA Plug RF Cable Assembly 1.5m RG316
SMA Male cable assembly , RG316, 1.5 mtrs
SMA Torque Wrench – Huber Suhner
Part Number: 74_Z-0-0-21 , The Huber Suhner 74Z-0-0-21 is a standard style steel PC / SMA torque wrench. Designed for use on SMA / PC 3.5 series connectors, the sma torque wrench has a torque of 1.00 Newton-meters (8.85 inch-pounds) and opening of 8 mm (.315″).
Torque Wrench,
SMA,
8mm (0.314″),
Fixed, 8.85 in-lbs (1.00Nm),
Huber + Suhner Inc.
RG178 RF Coaxial Cable – Per Metre 50 Ohm Unterminated
Coaxial Cable, RG178, Per Metre, Unterminated.
PART NUMBER:RG178U-PM