Currently Empty: £0.00
TNC Jack RF Connector for LMR240 – Bulkhead Crimp
Part Number: TNC8105-L240
TNC Jack (Conventional Female), Crimp, Bulkhead, LMR240, TNC8105-L240
40 dB N-Type RF Attenuator 100W DC-4 GHz 50 Ohm Plug to Jack
Part Number: CAT-100W-Nf-Nm-3G-40db
Attenuator, N Plug to N Jack, (Conventional Male to Female), High Power, 50ohm, DC, 3GHz, 100Watt, 40dB, CAT-100W-Nf-Nm-3G-40dB
N-Type Plug RF Connector 75 Ohm for RG59 – Crimp
Coaxial Connector, N, Plug, RG59, Crimp,
Part Number: CH-NP-59,
Coaxial Connector,
N Type,
Plug (Conventional Male),
RG59,
Crimp Pin and Ferrule,
SMA Plug to NEX10 Jack RF Adapter 50 Ohm – Low PIM
Adapter, SMA Plug to NEX 10 Jack, Low PIM,
Part Number: AD-A3NX8,
Coaxial Adapter,
1: SMA
Plug (Conventional Male),
2: NEX10
Jack (Conventional Female/ Socket),
Low PIM,
11 GHz,
VSWR 1.25,
RFShopUK- Other NEX10 Type Products
NEX10 is a trademark of Huber Suhner, Radiall and Rosenberger,
Manufactured by Jye Bao to International Standard IEC 61169-71 2022,
2-Way RF Power Splitter 400-4000 MHz N Jack 50 Ohm
Splitter, 2 Way, 400 to 4000 MHz, N Jack connector
Product Code: SP-0440-01
Manufacturer: Chang Hong
Gold Plated Ferrule for RG223 Cable
Ferrule, Gold Plated, for RG223 cable,
*Can be used to convert any RG58 Cable Connector to fit a RG223 (simply replace the RG58 Ferrule).
PART NUMBER: CH-F-0223-G
3.5 GHz Cantenna Kit with N Jack – DIY WiFi
Product Code: CanKit-3.5GHz-N Antenna,
Make Your own Antenna (Cantenna Kit),
N SMA Jack (Conventional Female),
3.5GHz,
Make your own Antenna ideal for extending WiFi signal to a Garage or External Home Office.
Uses Jye Bao Connector N864AL-0000 DATASHEET 4 x 8mm screws and nuts included.
Cantenna Kit for 3.5GHz See BUILD YOUR OWN CANTENNAS
N Plug to N Plug RF Cable Assembly 500mm 400 Series
Coaxial Cable Assembly, N Plug to N Plug, 400 Series, 5M, N30N30-400-500
Part Number: N30N30-400-500
N Plug (Conventional Male), Low Loss, 0.22dB per mtr at 2.5GHz,
SMA Jack to Jack RF Adapter 50 Ohm – Bulkhead O-Ring
Adapter, SMA Jack to SMA Jack, Bulkhead O-Ring,
Part Number: CH-AJ-AJ-BH-O
Coaxial Adapter,
SMA Jack (Conventional Female),
SMA Jack, (Conventional Female), Bulkhead, O-Ring,
3 dB N-Type RF Attenuator 2W DC-6 GHz 50 Ohm Plug to Jack
Part Number: G0-6G-3dB-N – compact 50 Ω fixed attenuator, 3 dB, rated 2 W to 6 GHz, N plug (male) to N jack (female) for quick in-line level control on broadband RF links.
QN Plug RF Connector for 400 Series – Crimp
Coaxial Connector, QN, Plug, LMR400,
Part Number: CH-QNP-400,
QN, N Type Quick Fit, (Push fit, Blind-Mate),
Plug (Conventional Male),
400 Series (LMR400),
Crimp,
RP-TNC Plug RF Connector for RG316 – Right Angle Crimp
Connector, TNC Plug, Reverse Polarity, RG316, Crimp, RA
Part Number: CH-RTP-316-RA
Coaxial Connector
TNC
Plug Reverse Polarity (Female Pin)
RG316
Crimp
Right Angled
-£2.30
2.4/5 GHz Dual-Band Dipole Antenna 5 dBi RP-SMA Plug
Part Number: DA-DB-05-A60 – dual-band 2.4 / 5 GHz “rubber ducky” dipole antenna with SMA reverse polarity plug (RP-SMA, female pin) for 50 Ω Wi-Fi / ISM equipment. Around 5 dBi peak gain with omnidirectional coverage in both bands.
N Plug to N Plug RF Cable Assembly 2m 400 Series 50 Ohm
Coaxial Cable Assembly, N Plug to N Plug, 400 Series, 2M, N30N30-400-2000
Part Number: N30N30-400-2000
N Plug (Conventional Male), Low Loss, 0.22dB per mtr at 2.5GHz,
N Plug to TNC Plug RF Cable Assembly 500mm 200 Series
Part Number: N30T30-200-500 , Connector 1: N Plug (Male Pin)
Connector 2: TNC Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 0.5m
RP-TNC Jack to U.FL RF Cable Assembly 300mm RG178
Part Number: T95UFL-178-300
TNC Jack-Reverse Polarity (Male pin), Bulkhead, to UFL, RG178, 300mm, T95UFL-178-300
TNC Jack RF Connector for LMR400 – EZ-Fit Crimp
Part Number: TNC81EZ-L400
TNC Jack (Conventional Female), Crimp, LMR400, TNC81EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400. A better choice for a multistrand 400 cable) would be TNC8100-L400 (for a soldered inner connection) or TNC8100-0213 (for a soldered or crimped inner connection)Â
TNC Plug RF Connector for LMR400 – EZ-Fit Crimp
Part Number: TNC31EZ-L400
TNC Plug (Conventional Male), Crimp, LMR400, TNC31EZ-L400
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
EZ in part number indicates “easy fit”. It is important that the instructions on the data sheet are followed carefully. Particularly the inner wire has to be deburred on the cut to prevent damage during assembly.
NOTE: These connectors only work with solid core LMR400 and equivalent cables.. A better choice for a multistrand 400 cable is TNC3100-L400 (for a soldered inner connection) or TNC 3100-0213 (for a soldered or crimped inner connection)
Â
2-Way RF Power Splitter 5-6 GHz N Jack 50 Ohm
Splitter, N Jack, 5-6 GHz, 2 way
Part Number: SP-58-01
Manufacturer: Chang Hong
3-Way RF Power Splitter 700-2700 MHz N Jack 50 Ohm
Splitter, N Jack, 700 MHz-2.7 GHz, 3 way
Part Number: SP-0727-02
Manufacturer: Chang Hong
N-Type Plug RF Connector 50 Ohm for 200 Series – Crimp
Connector, N Plug, 200 Series
Part Number: N3100A-L200
N Plug (Conventional Male)
Crimp
N Plug to TNC Plug RF Cable Assembly 2m 200 Series
Part Number: N30T30-200-2000 , Connector 1: N Plug (Male Pin)
Connector 2: TNC Plug (Male Pin)
Cable Type: low loss 200 series 0.6 dB per metre at 2.5GHz (diameter ~5mm)
Length: 2m