Yagi Directional Antenna, 824–960 MHz, 14 dBi, 1.2 m Pole-Mount, 3 m Lead to N Jack – ANT0809Y14G14

Product Description

Yagi Directional Antenna, 824–960 MHz, 14 dBi, 1.2 m Pole-Mount, 3 m Lead to N Jack – ANT0809Y14G14

Part Number: ANT0809Y14G14

The ANT0809Y14G14 is a high-gain directional Yagi designed for 50 Ω systems operating in the 824–960 MHz range (typical LTE 800/900 bands). With approximately 14 dBi of forward gain and a 1.2 m boom, it focuses signal into a tight main lobe to pull in service from distant or obstructed base stations.

• Frequency band: 824–960 MHz (LTE 800/900, GSM 900, 900 MHz ISM)
• Gain: ~14 dBi directional
• Boom length: ~1.2 m (approx.)
• Feed: supplied with 3 m coax lead terminated in an N jack (female)
• Impedance: 50 Ω
• Polarisation: linear – mount vertical for mobile networks, or horizontal for other links
• Mounting: pole/mast brackets included (orient for correct polarisation and aim)
• Construction: weather-resistant aluminium elements/boom with sealed feed

Where it helps

• Extending coverage to rural / fringe locations on LTE 800/900
• Point-to-site links where the serving mast direction is known
• SCADA / telemetry around 900 MHz needing a tight beam

Installation tips

• Mount as high and clear as possible; keep the boom pointed at the target mast.
• Set vertical polarisation for mobile networks (elements vertical) unless your operator/site uses horizontal.
• Use low-loss 50 Ω coax from the antenna’s N jack to your equipment (LMR-240/400 class). Keep the total run short.
• Weather-seal outdoor connectors with self-amalgamating tape.

Compatibility – quick check
Works with 50 Ω equipment on 824–960 MHz. The antenna’s pigtail ends in an N jack (female); add a short pigtail/adapter to match your device (e.g. N-plug to SMA-plug / TS-9, etc.).

This product is equivalent to the latest models but available at a heavily discounted price due to surplus stock.

Perfect for cost-conscious buyers who want quality without paying full price.