Panel-Fit “Euro Base” Antenna, 800–960 / 1710–2170 MHz, M6×0.75 Stud – EB-M6x0-75

Product Description

Panel-Fit “Euro Base” Antenna, 800–960 / 1710–2170 MHz, M6×0.75 Stud – EB-M6x0-75

Part Number: EB-M6x0-75

The EB-M6x0-75 is a low-profile panel-fit Euro base for cellular bands at 800–960 MHz and 1710–2170 MHz (GSM/LTE 900, DCS 1800, UMTS 2100). It uses the standard M6×0.75 threaded stud so you can screw on a compatible whip and route the feed through the mounting hole to your radio/booster/telematics unit.

• Bands: 800–960 MHz and 1710–2170 MHz (typical 2G/3G/4G ranges)
• Thread: M6×0.75 Euro-base (for screw-on whips)
• Mounting: through-panel / panel-fit with lock-nut and gasket
• System impedance: 50 Ω
• Form factor: low-profile base; whip not included unless specified on the product options

What you get

• Euro-base panel mount with M6×0.75 stud
• Fixings (lock-nut / washer) for through-panel install
• Feed connection brought inside the panel/enclosure (see product photos/spec for connector lead, if supplied)

Good use-cases

• Vehicle, cabinet or enclosure installs needing a tidy, permanent antenna base
• Industrial telemetry, tracking and cellular gateways on 900/1800/2100 MHz
• Retrofits where you want a standard Euro-base to accept a wide choice of whips

Installation tips

• Mount through a flat metal panel and tighten the lock-nut; a metal ground plane beneath the base improves performance.
• Choose a whip rated for M6×0.75 and the bands you need (e.g., 900/1800/2100 MHz).
• Weather-seal external joints if used outdoors or on vehicles.

Compatibility – quick check
Use this base if your application is 50 Ω and you need a panel-fit Euro-base with M6×0.75 thread. Pair it with a matching M6×0.75 screw-on whip for 800–960 and/or 1710–2170 MHz. If your equipment uses SMA, FME, TNC or other connectors, add the appropriate short pigtail inside the enclosure.