Flat Panel Directional Antenna, 2.45 GHz, 9 dBi – SuperPass SPFPG10

Product Description

SPFPG10 2.45GHz 9dBi panel antenna – SuperPass flat panel directional

Part Number: SPFPG10

The SPFPG10 2.45GHz 9dBi panel antenna is a slim, directional flat panel designed for Wi-Fi and other systems in the 2.4 GHz ISM band (around 2.45 GHz). Unlike a small “rubber duck” omni, this panel focuses the signal towards one area or building, helping to boost weak links and cut interference in noisy environments. RFShop sell it as a SALE item – equivalent performance to newer models but at a heavily discounted price due to surplus stock.:contentReference[oaicite:0]{index=0}

With around 9 dBi of gain, it’s ideal for short-to-medium range point-to-point links, feeding a remote outbuilding, or improving coverage in a specific direction. Mount the panel outdoors or in a loft and aim it roughly at the access point or client device.

• Flat panel directional antenna for 2.4 GHz Wi-Fi / ISM
• Centre frequency: approx. 2.45 GHz (2.4–2.5 GHz band)
• Gain: approx. 9 dBi (high-gain compared with a small omni)
• Radiation: narrow forward beam with high front-to-back ratio
• Polarisation: linear (mount vertically or horizontally as needed)
• Connector: flat-panel feed (typically N-type on this style – check the product photos/spec for your exact unit)
• Outdoor-capable housing when mounted correctly; also suitable for loft / indoor window installs

Good use-cases

• 2.4 GHz Wi-Fi point-to-point links between buildings
• Directing coverage at one property or area instead of radiating 360°
• Extending Wi-Fi to a workshop, office or outbuilding
• General 2.4 GHz ISM projects needing a compact directional panel

Install tips

• Mount the panel so the front face points toward the other end of the link.
• Use low-loss 50 Ω coax (LMR-240/400 class) and keep cable runs short.
• Match polarisation at both ends (vertical-vertical or horizontal-horizontal).

Compatibility
Works with 50 Ω 2.4 GHz radios, access points and bridges. If your radio uses SMA, RP-SMA, etc., add a suitable pigtail from the panel’s connector to your device.