Dipole Antenna, Straight, N Plug (Male), 2.45 GHz, 50 Ω – ANT-NM2.45G1WST

Product Description

Dipole Antenna, Straight, N Plug (Male), 2.45 GHz, 50 Ω – ANT-NM2.45G1WST

Part Number: ANT-NM2.45G1WST

The ANT-NM2.45G1WST is a compact, straight dipole antenna designed for 2.45 GHz operation in a 50 Ω system. It uses a standard N plug (conventional male) to screw directly onto N-type jacks on enclosures, bulkheads, surge arrestors or test panels. JyeBao’s datasheet specifies around 1.8 dBi gain with vertical polarisation at 2.45 GHz

• Frequency: 2.45 GHz (2.4 GHz ISM / Wi-Fi band)
• Impedance: 50 Ω
• Connector: N plug (male, standard polarity)
• Geometry: straight dipole
• Polarisation: vertical
• Nominal gain: ≈ 1.8 dBi (datasheet)
• Form factor: small “stick” antenna for direct N-type mounting

Typical applications

• 2.4 GHz Wi-Fi / ISM test setups on benches or in screened rooms
• Enclosures and cabinets that bring RF out on an N jack at 2.4 GHz
• Industrial 2.4 GHz telemetry / control systems needing a simple omni

Install / usage notes

• Mount the antenna vertically on an N jack (female) for correct polarisation and omni pattern.
• Ideal where you want to avoid a long coax run – place the radio close to the antenna point and use this as the direct radiator.
• If your equipment uses SMA, RP-SMA, TNC or other connectors, use a short low-loss pigtail from that connector to an N jack, then screw the antenna on.

DATASHEET – ANT-NM2.45G1WST