90° Sector Panel Antenna, N Jack, 902–928 MHz, 11 dBi – SPDC3F

Product Description

90° Sector Panel Antenna, N Jack, 902–928 MHz, 11 dBi – SPDC3F

Part Number: SPDC3F

The SPDC3F is a compact sector (wide-beam directional) panel covering the 902–928 MHz ISM band. With approximately 11 dBi forward gain and a nominal 90° horizontal beamwidth, it focuses energy where you need coverage while rejecting noise from behind. A rear N jack (conventional female) makes it simple to hook up via a short low-loss pigtail to your gateway or radio.

• Frequency band: 902–928 MHz (ISM900 / 915 MHz)
• Gain: ~11 dBi sector panel
• Horizontal beamwidth: ~90°; narrow vertical beam for range
• Impedance: 50 Ω
• Connector: rear N jack (female)
• Polarisation: linear (mount for vertical or horizontal as required)
• Outdoor-ready flat panel with rear bracket points for pole/wall mounting

Typical applications

• LoRa / LoRaWAN gateways and base stations at 915 MHz
• 900 MHz ISM telemetry, AMR/AMI, SCADA and industrial links
• Campus, yard, farm or site coverage where clients are in one general direction
• Point-to-multipoint at 915 MHz where an omni picks up too much interference

Install tips

• Mount the panel facing your coverage area; small pan/tilt tweaks can significantly improve SNR.
• Use low-loss 50 Ω coax (e.g., 200/240/400-series) and keep runs short at 900 MHz.
• Match polarisation (V–V or H–H) with your radios; for diversity/MIMO use two panels with appropriate spacing and orientation.

Compatibility – quick check
Works with 50 Ω radios operating in 902–928 MHz. The antenna presents an N jack (female); add the correct pigtail (e.g., N-plug to SMA/RP-SMA/others) to suit your device.

This product is equivalent to the latest models but available at a heavily discounted price due to surplus stock.

Perfect for cost-conscious buyers who want quality without paying full price.